557323
35
Zoom out
Zoom in
Previous page
1/53
Next page
Setup Procedures
26
7 Connect one end of the 50-pin SCSI flat cable to the computer’s
SCSI card. Align the red line of the cable with Pin 1 of the card’s
SCSI connector. Next, connect a free 50-pin connector on the SCSI
flat cable to the back of the CRW2100S drive such that the red line
on the cable is aligned with pin 1, marked “SCSI INTERFACE
CONNECTOR 1.”
AUDIO OU T
ID SELECT
PARITY
TERMIN ATOR
BLOCK SIZE
DC INPUT
1
+
5V G
+
12
V
RL124G
SCSI
INTERFACE
CONNECTOR
Align red line
with Pin 1 of
SCSI INTERFACE
CONNECTOR 1
To Pin 1
Pin 1
SCSI
INTERFACE
CONNECTOR
1
Align red line
with Pin 1 of
SCSI INTERFACE
CONNECTOR 1
Mark
Pin 1
50-pin SCSI flat cable
SCSI card
About SCSI card termination
To connect internally-mounted SCSI devices, the SCSI card’s on-board
internal SCSI termination must be switched ON. With most cards, this is
done automatically. If your SCSI card requires that you manually disable
internal termination, refer to the documentation that came with it.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CRW-2100S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CRW-2100S in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info