516893
11
Zoom out
Zoom in
Previous page
1/68
Next page
Control Panel
CP5/CP50 Owner’s Manual 11
Component Names & Functions
9[STORE/ASSIGN] button (pages 28
, 50)
Press this button to call up a screen for storing Performances
and system settings. In addition, by pressing and holding
the [STORE/ASSIGN] button (for at least one second) within
the Performance screen or a parameter setting screen (for
any block other than the Master Equalizer or Master
Compressor), you can call up a screen for directly assigning
each of the Knobs 1 to 3 (see ( below) to block parameters.
)[COMMON] button (page 35)
Press this button to open the parameter setting screen for
the Common Settings area, which affects each of the left and
right parts in the same way. The lamp to the top-left of the
button lights up whenever this screen is being displayed.
![PRE-AMP] button (pages 31, 34)
@[MOD-FX] button (pages 31, 34)
#[PWR-AMP] button (pages 31, 34)
$[REVERB] button (pages 31, 35)
Press these buttons to toggle on and off the Pre-Amplifier
block, Modulation Effect block, or Power-Amplifier /
Compressor block (CP5 only) for currently-selected part or
the Reverb block. The lamp to the top-left of each button
lights up whenever the corresponding block is turned on. It
should be noted, however, that the Pre-Amplifier block has
an effect on the sound only if a voice from the PIANO or
E.PIANO category has been selected for the part in
question. Furthermore, if you press and hold one of these
buttons (for at least one second), the parameter setting
screen for the corresponding block will be displayed, and
the lamp to the top-left of the button will start to flash. Even if
a block’s parameter setting screen is being displayed, it can
still be toggled on and off by pressing the corresponding
button. It should be noted that these lamps will flash in one of
two different ways to indicate whether the block is on or off;
specifically, the lamp stays lit longer when the block is on,
and it stays off longer when the block is off.
%[SONG SETTING] button (page 37)
Press this button to open the Song Setting screen. The lamp
to the top-left of the button lights up whenever this screen is
being displayed.
^[REC] button (page 41)
Press this button to open the Record screen. The lamp to the
top-left of the button lights up whenever this screen is being
displayed.
&Sequencer Transport buttons (pages 37, 42)
Use these buttons to control the recording and playback of
backing tracks.
[LL ] (Rewind) button
Whenever you are using a Preset Drum Pattern or a User
Song as the backing track, pressing this button will move the
play position back by one measure at a time. Alternatively, if
you are using a Wave file as the backing track, pressing this
button will move the play position back by one second at a
time. Press and hold the button to rewind continuously.
CB E HJ
A D F G I K
L
B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7
CP5 only
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP50 in the language / languages: English as an attachment in your email.

The manual is 10,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP50

Yamaha CP50 User Manual - German - 68 pages

Yamaha CP50 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info