516892
58
Zoom out
Zoom in
Previous page
1/68
Next page
On-screen Messages
58 CP5/CP50 Owner’s Manual
Appendix
Please select a left or right part. This message is displayed if the [VOICE], [PRE-AMP], [MOD-FX], or [PWR-AMP]
button is pressed even though the currently selected part is not a left or right part.
The blocks corresponding to these buttons can only process sound from the left
and right parts.
Please select a piano voice. This message is displayed if the [PRE-AMP] button is pressed even though the
currently selected part has been assigned a non-piano voice. The Pre-Amplifier
block can only process sound from parts with a PIANO or E.PIANO voice.
Please stop sequencer. This message is displayed to remind you to stop backing-track playback.
Read only file. This message is displayed if you attempt to delete, rename, or overwrite a read-
only file.
Receiving MIDI bulk... This message is displayed while your CP5 or CP50 is busy receiving data created
using the Bulk Dump function.
Recording... This message is displayed while your CP5 or CP50 is busy recording a User Song
or Wave file.
Recording stopped. This message is displayed if recording was stopped as a result of insufficient
sequencer memory.
Saving... [EXIT] to cancel. This message is displayed while your CP5 or CP50 is busy saving a file.
Scanning autoloaded files. This message is displayed while your CP5 or CP50 is busy scanning for a file to
be loaded automatically.
Seq data is empty. This message is displayed if you attempt to save a User Song that does not
contain any data.
Seq data is not empty. This message is displayed if you attempt to record a User Song even though all
User Songs already contain data.
Seq memory full. This message is displayed if recording, reception of MIDI data, or the loading of
data from a USB flash-memory device cannot be carried out as a result of the
stage piano’s internal sequencer memory already being full. In order to remedy
this situation, unneeded User Songs should be deleted.
Transmitting MIDI bulk... This message is displayed while your CP5 or CP50 is busy transmitting MIDI bulk
data.
USB communication failed. This message is displayed if an error occurs while communicating with a USB
flash-memory device.
USB connection terminated. This message is displayed if connection with a USB flash-memory device was
lost due to abnormal electric current.
USB device full. This message is displayed if a USB flash-memory device is full and no more files
can be saved on it. In such a case, use a new USB flash-memory device or make
space by erasing unwanted data from the current device.
USB device is not responding. This message is displayed if the USB flash-memory device plugged into the USB
TO DEVICE port fails to respond.
USB device not ready. This message is displayed if a USB flash-memory device has not been correctly
plugged into your CP5 or CP50.
USB device read/write error. This message is displayed if an error occurs while reading data from, or writing
data to, a USB flash-memory device.
USB device unformatted. This message is displayed if the plugged-in USB flash-memory device is either
unformatted or formatted in a way that your CP5 or CP50 does not support. In
such a case, check the content of the USB flash-memory device.
USB device write protected. This message is displayed if the USB flash-memory device has been write
protected.
USB power consumption exceeded. This message is displayed if the current being drawn by the USB flash-memory
device exceeds the level supported by your CP5 or CP50.
Utility & MComp stored. This message is displayed when Utility settings, Master Compressor settings, and
other system settings have been successfully stored.
Working... This message is displayed while your CP5 or CP50 is saving or loading data or
when the [EXIT] button has been pressed to cancel an operation. It will disappear
when the processing required for cancellation has been completed.
Message Description
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP5 in the language / languages: English as an attachment in your email.

The manual is 10,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP5

Yamaha CP5 User Manual - German - 68 pages

Yamaha CP5 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info