516892
39
Zoom out
Zoom in
Previous page
1/68
Next page
Performing with a Backing Track
CP5/CP50 Owner’s Manual 39
Quick Start Guide
8Using Knobs 1 to 3, set the volume, pan, and reverb send level for the TRACK part as required.
NOTE The volume of the TRACK part can also be adjusted directly using the [TRACK] knob.
Wave files created using devices other than your CP5 or CP50 may be very loud. If you select such a file for use as a backing track
and do not turn down the volume in advance, it may play back at an extremely high volume. It is important, therefore, to always turn
the TRACK parts volume down fully (i.e., to 0) before playing a newly-selected Wave file. Then, when playback is started as
described in Step 11 below, you can gradually increase the TRACK part volume to a suitable level.
9
Press the [EXIT] button to return to the Performance screen.
10
Ensure that the lamp for the TRACK part is lit (indicating that the part is turned on). If necessary, press the [TRACK]
button to turn on the part.
11
Press the [R/K] (Play / Pause) button as you play the keyboard. The selected backing track will now play along with you.
You can stop backing-track playback at any time by pressing the [J] (Stop) button.
HINT
Using Key-on Start to Begin Playback
Your CP5 or CP50 also features a Key-on Start function that can be used to start backing-track playback in response to playing of
the keyboard. The following describes how to use this function.
1Press the [SONG SETTING] button, followed by the [3] button.
Page 3 of the Song Setting screen will be displayed.
2Turn Knob 1 to set the StartKey parameter as required.
If you set this parameter to “all”, any key can be pressed to start playback.
3If the lamp to the top-left of the [R/K] (Play / Pause) button is currently off, press this button while holding down the [J]
(Stop) button.
Standby condition for backing track playback will be activated and the lamp will begin to flash.
4Press the key that you set for the StartKey parameter in Step 2 above.
The currently selected backing track will start to play. You can stop backing-track playback at any time by pressing the [J]
(Stop) button.
NOTE Standby condition for backing track playback can be activated automatically whenever you select a new Performance using the AutoKeyOn
parameter from page 3 of the Song Setting screen. (See the Reference Manual pdf document for more details.)
Volume PanRevSendE
100L63127
Knob 1 Knob 2 Knob 3
CAUTION
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP5 in the language / languages: English as an attachment in your email.

The manual is 10,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP5

Yamaha CP5 User Manual - German - 68 pages

Yamaha CP5 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info