588665
50
Zoom out
Zoom in
Previous page
1/60
Next page
50 CP4 STAGE/CP40 STAGE Owner’s Manual
Appendix
Now working...
This message is displayed while your stage piano is tidying up after, for
example, you press the [EXIT] button to cancel a load or save operation.
Overwrite?
This message is displayed when saving files to confirm whether or not you wish
to overwrite a file of the same name that already exists on the USB flash-memory
device.
Panel Locked.
This message is displayed if you attempt to operate a controller that is currently
disabled by the Panel Lock function. If necessary, press and hold the [PANEL
LOCK] button to unlock all controllers.
Please keep power on...
This message is displayed while your stage piano is writing data to its User
Memory. You should never turn off the stage piano while it is in this state. If this
precaution is not observed, your original settings may be lost or the internal
system may be damaged, rendering the instrument unable to startup normally
when it is next turned on.
Please stop audio play/rec.
This message is displayed to inform you that the recording or playback of audio
must first be stopped in order to perform the selected operation.
Quick reset
This message is displayed when you have executed the Quick Reset function by
pressing the [ENTER] button with the [SHIFT] button held down. Doing so
causes the currently selected Performance to be initialized and restores the
Performance screen.
Receiving MIDI bulk...
This message is displayed while your stage piano is busy receiving data
created using the Bulk Dump function.
Rec file names all used.
This message is displayed when all possible names that can be automatically
assigned to a recorded audio file have been used. These files are automatically
named “WAV***}{”, where *** is a number from 001 to 999. To proceed, either
delete one or more of these files or rename them using a different naming
format.
System memory crashed.
This message is displayed if a problem occurs while writing data to the
instrument’s internal memory.
Transmitting MIDI bulk...
This message is displayed while your stage piano is busy transmitting MIDI bulk
data.
USB connection terminated.
This message is displayed if connection with the USB flash-memory device was
lost due to an abnormal electric current. Unplug the USB flash-memory device
and press the [ENTER] button to return.
USB device full.
This message is displayed if the connected USB flash-memory device is full and
no more files can be saved on it. In such a case, use a new USB flash-memory
device or make space by erasing unwanted data from the one currently
connected.
USB device not ready.
This message is displayed if you attempt to save data or perform another similar
operation with no USB flash-memory device connected.
USB device read/write
error.
This message is displayed if an error occurs during the exchange of data with
the connected USB flash-memory device or if you attempt to delete or overwrite
a read-only file.
USB device unformatted.
This message is displayed if the connected USB flash-memory device is either
unformatted or formatted in a way that your stage piano does not support. In
such a case, check the content of the USB flash-memory device.
USB device write protected.
This message is displayed if the USB flash-memory device has been write
protected.
USB power consumption
exceeded.
This message is displayed if the current being drawn by the USB flash-memory
device exceeds the level supported by your stage piano.
USB transmission error.
This message is displayed if an error occurs while communicating with the
connected USB flash-memory device.
Utility stored.
This message is displayed when Utility settings have been stored.
Message Description
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP40 STAGE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP40 STAGE in the language / languages: English as an attachment in your email.

The manual is 14,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP40 STAGE

Yamaha CP40 STAGE User Manual - Dutch - 60 pages

Yamaha CP40 STAGE User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info