Manual Yamaha CP40 STAGE (page 43 of 60) (English)

588665

Zoom out

Zoom in

1/60

CP4 STAGE/CP40 STAGE Owner’s Manual 43

Quick Start Guide

Changing the master tuning

You can adjust the tuning of the stage piano as a whole

as described below.

1 Press the [UTILITY] button.

The Utility menu will be displayed.

2 Use the [u] button to select 01: General, and

then press the [ENTER] button.

The pane for setting the master tuning will be

displayed.

3 Move the cursor (R) to the MasterTune

parameter using the [

l] button, and then

change its setting using the Data Dial.

The master tuning can be set in units of one cent.

NOTE The stage piano’s default tuning is 440 Hz (for A3), and

3 to 4 cents is roughly equivalent to 1 Hz.

4 Press the [STORE] button.

All Utility settings will be stored in the stage piano’s

memory.

Restoring initial settings

As described below, the Factory Set function can be

used to restore your stage piano’s User Memory to its

initial condition. When executed, all Performances and

Utility settings stored in User Memory will be returned to

their defaults. This can prove useful when you have

accidentally overwritten some of the User Memory’s

default Performances and Utility settings.

NOTICE

When the Factory Set function is executed, all Performances

and Utility settings currently stored in User Memory will be

overwritten with their defaults. It is wise, therefore, to

regularly create backup copies of important data on a USB

flash-memory device or the like (page 39).

1 Press the [UTILITY] button.

The Utility menu will be displayed.

2 Use the [d] button to select 07: Job, and then

press the [ENTER] button.

The Utility Job menu will be displayed.

3 Use the [u] button to select 01: FactorySet,

and then press the [ENTER] button.

The Factory Set screen will be displayed.

4 Set the PowerOn Auto parameter to “off”, and

then press the [ENTER] button.

The following confirmation message will be displayed

before executing the Factory Set function.

Press the [-1/NO] button if you do not wish to

proceed. In addition, you can also return to the

Performance screen by pressing the [EXIT] button

several times.

NOTICE

If you set the PowerOn Auto parameter to “on” before

executing the Factory Set function, the function will then

execute automatically whenever you subsequently turn

on your stage piano. As this can result in the loss of

important settings and data, we recommend that the

parameter normally be set to “off”. When you return the

PowerOn Auto parameter from “on” to “off”, you must

execute the Factory Set function in this condition to

store the new setting.

5 Press the [+1/YES] button.

The Factory Set function will be executed.

NOTICE

You should never turn off the stage piano while the

Factory Set function is executing — that is, while the

message is displayed on-screen. If this precaution is not

observed, the content of User Memory may be lost and

system data may become corrupted, preventing the

instrument from operating normally the next time it is

turned on.

6 Press the [EXIT] button the required number

of times to exit the Utility area.

UTILITY Ma

General

sterTune Trnsps

0/440

0Hz + 0

UTILITY JOB

D01:FactorySet

Job

FactorySet

PowerOn Auto

Roff

Are you

[NO]

sure?

/[YES]

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP40 STAGE in the language / languages: English as an attachment in your email.

The manual is 14,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP40 STAGE

Yamaha CP40 STAGE User Manual - Dutch - 60 pages

Yamaha CP40 STAGE User Manual - French - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha CP40 STAGE Manual

Product: