588665
37
Zoom out
Zoom in
Previous page
1/60
Next page
CP4 STAGE/CP40 STAGE Owner’s Manual 37
Quick Start Guide
5 Press the [R] (Play) button.
The selected audio file will start to play. During
playback, the light above the [R] (Play) button will
turn on.
6 To stop or pause playback, press the
[J] (Stop) button.
Playback of the audio file will stop.
Renaming an audio file
As described below, you can rename audio files (.WAV)
created by the stage piano or from another source on the
Audio Playback screen.
1 Carry out Steps 1 to 3 from Playing Audio
Files to select the file you wish to rename.
2 Use the [d] button to move to the screen’s
second pane.
3 Move the cursor (R) to Rename using the
[r] button, and then press the [ENTER]
button.
4 Change the name of the file as required, and
then press the [ENTER] button.
For details on how to set a name, refer to Entering text
(page 20) from the Basic Operations & Display
Content section. The following confirmation message
will be displayed before a file is renamed.
Press the [-1/NO] button if you do not wish to
proceed.
5 Press the [+1/YES] button.
The file will be renamed.
Deleting an audio file
As described below, you can delete an audio file (.WAV)
from the connected USB flash-memory device on the
Audio Playback screen.
1 Carry out Steps 1 to 3 from Playing Audio
Files to select the file you wish to delete.
2 Use the [d] button to move to the screen’s
third pane.
Tip
Starting and stopping audio playback using a
foot switch
With an FC4 or FC5 Foot Switch connected via the
[ASSIGNABLE] FOOT SWITCH jack, you can make
the following setting in order to start and stop
playback of audio files using the foot switch.
Press [UTILITY]; select 03: Controller; press [ENTER];
set FS (Foot Switch Control Number) to “98 (Play/
Stop)”.
Tip
Using the Key-on Start function
As described below, your stage piano’s Key-on Start
function can be used to start recording or playback of
an audio file automatically when you play the
keyboard.
1 Carry out Steps 1 to 5 from Recording Your
Playing as Audio or Steps 1 to 4 from
Playing Audio Files.
2 Hold down the [J] (Stop) button and press
the [R] (Play) button.
The light above the [R] (Play) button will start to
flash to indicate that Key-on Start is active. (If you
are preparing to record, the light above the [I]
(Record) button will also be flashing at this time.)
NOTE Key-on Start can be deactivated by pressing the
[J] (Stop) button once again.
3 Play any key.
Playback or recording will start automatically.
NOTE
No precount will be played when starting recording using
the Key-on Start function, even if a value other than “off”
was set for the PreCount parameter in Step 5 of Recording
Your Playing as Audio.
Certain screen operations will cause Key-on Start to be
deactivated while on standby for a key to be played.
AUDIO
PLAY 01:15
File Volume
RWAV001}{ 127 D
AUDIO
PLAY 00:00
File Rename
RWAV001}{ [ENTER] W
AUDIO
Rename
Name
[WAV001}{]
Are you
[NO]
sure?
/[YES]
AUDIO
PLAY 00:00
File Delete
RWAV001}{ [ENTER] U
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP40 STAGE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP40 STAGE in the language / languages: English as an attachment in your email.

The manual is 14,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP40 STAGE

Yamaha CP40 STAGE User Manual - Dutch - 60 pages

Yamaha CP40 STAGE User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info