27534
37
Zoom out
Zoom in
Previous page
1/54
Next page
35
2.1.(9) Effect4 Depth ( Variation Effect Send Level )
Cntrl# Parameter Data Range
94 Effect4 Depth 0...127
2.2 Mode Messages
The following Channel Mode messages are supported. (But the
actual mode is fixed to Poly and can not be changed.)
Cntrl# Parameter Data Range
120 All Sound Off 0
121 Reset All Controllers 0
123 All Notes Off 0
124 Omni Off 0
125 Omni On 0
126 Mono 0 ~ 16
127 Poly 0
2.2.(1) All Sound Off
Switches off all sound from the channel. Does not reset Note On
and Hold On conditions established by Channel Messages.
2.2.(2) Reset All Controllers
Resets controllers as follows.
Controller Value
Expression 127 (max)
Damper Pedal 0 (off)
Sostenuto 0 (off)
Soft Pedal 0 (off)
2.2.(3) All Notes Off
Switches off all of the channel’s “on” notes. Any notes being held
by DAMPER or SOSTENUTO continue to sound until DAMPER/
SOSTENUTO goes off.
2.2.(4) Omni Off (reception only)
Same processing as for All Notes Off.
2.2.(5) Omni On (reception only)
Same processing as for All Notes Off.
2.2.(6) Mono (reception only)
Same processing as for All Sound Off.
2.2.(7) Poly (reception only)
Same processing as for All Sound Off.
* When control change reception is turned OFF in the Function
mode, no control change data is transmitted or received.
* Local on/off, OMNI on/off are not transmitted. (The appropriate
note off number is supplied with “All Note Off” transmission).
* When a voice bank MSB/LSB is received, the number is stored
in the internal buffer regardless of the received order, then the
stored value is used to select the appropriate voice when a
program change message is received.
* The Multi-timbre and Poly modes are always active. No change
occurs when OMNI ON, OMNI OFF, MONO, or POLY mode
messages are received.
Si vous êtes très familier avec l’interface MIDI ou si vous
utilisez un ordinateur pour commander votre matériel de
musique au moyen de messages MIDI générés par
ordinateur, les données suivantes vous seront utiles et vous
aideront à commander le Clavinova.
SI usted está ya familiarizado con MIDI, o si emplea una
computadora para controlar sus aparatos musicales con
mensajes MIDI generados por computadora, los datos
proporcionados en esta sección le ayudarán a controlar la
Clavinova.
If you’re already very familiar with MIDI, or are using a
computer to control your music hardware with computer-
generated MIDI messages, the data provided in this section
can help you to control the Clavinova.
Falls Sie bereits mit MIDI vertraut sind oder einen Compu-
ter zur Erzeugung von MIDI-Steuermeldungen für die
Instrumente verwenden, können Sie sich zur Steuerung des
Clavinovas nach den im folgenden Abschnitt aufgeführten
Spezifikationen richten.
1. NOTE ON/OFF
Data format: [9nH] -> [kk] -> [vv]
9nH = Note ON/OFF event (n = channel number)
kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 /
Receive: 00H ~ 7FH = C-2 ~ G8)
vv = Velocity (Key ON = 1 ~ 127. Key OFF = 0)
Data format: [8nH] -> [kk] -> [vv]
8nH = Note OFF event (n = channel number)
kk = Note number: 00H ~ 7FH = C-2 ~ G8
vv = Velocity (Key OFF = 0 ~ 127)
* 8nH (note off) is receive only.
9nH (vvH=00H) used for transmission.
2. CONTROL CHANGE & MODE MESSAGES
Data format: [BnH] -> [cc] -> [vv]
BnH = Control event (n = channel number)
cc = Control number
vv = Data Range
2.1 Control Change
2.1.(1) Bank Select
Cntrl# Parameter Data Range
0 Bank Select MSB 0:Normal
32 Bank Select LSB 0...127
112 Variation Off
113 Variation On
A new bank selection does not become effective until receipt of the
next Program Change message.
2.1.(2) Main Volume (reception only)
Cntrl# Parameter Data Range
7 Volume MSB 0...127
2.1.(3) Expression
Cntrl# Parameter Data Range
11 Expression MSB 0...127
2.1.(4) Damper
Cntrl# Parameter Data Range
64 Damper MSB 0...127
Half pedal continuous data is received and accepted.
2.1.(5) Sostenuto
Cntrl# Parameter Data Range
66 Sostenuto 0...127
(0-63:off, 64-127:on)
2.1.(6) Soft Pedal
Cntrl# Parameter Data Range
67 Soft Pedal 0...127
(0-63:off, 64-127:on)
2.1.(7) Attack Time
Cntrl# Parameter Data Range
73 Attack Time 0...127
2.1.(8) Effect1 Depth ( Reverb Send Level )
Cntrl# Parameter Data Range
91 Effect1 Depth 0...127
Adjusts the reverb send level.
MIDI Data Format/MIDI-Datenformat/Format des données MIDI/
Formato de datos MIDI
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP555 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP555 in the language / languages: German as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP555

Yamaha CLP555 User Manual - English - 54 pages

Yamaha CLP555 User Manual - French - 54 pages

Yamaha CLP555 User Manual - Spanish - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info