The Multi-Timbre Mode...........................................................................................................................................................
The Multi-Timbre mode is a special mode in which the Clavinova
voices can be independently controlled on different MIDI channel
numbers by an external MIDI device. The Multi-Timbre mode can be
activated as follows:
NO
HARPSI-
CHORD
P
O
R
MIDI/TRANSPOSE
HARPSI-
CHORD
HARPSI-
CHORD
= Multi-Timbre Mode ON
= Multi-Timbre Mode OFF
ZHold down the [MIDI/TRANSPOSE] button.
XPress the [HARPSICHORD] voice selector. If the HARPSI-
CHORD LED is lit when the [HARPSICHORD] voice selector
is pressed, you have turned the Multi-Timbre mode ON. If the
HARPSICHORD LED is not lit when the [HARPSICHORD]
voice selector is pressed, you have turned the Multi-Timbre mode
OFF.
CRelease the [MIDI/TRANSPOSE] button.
The MIDI Split & Left Local OFF Mode...................................................................................................................
In the MIDI split mode one section of the Clavinova keyboard is
used to play a Clavinova voice in the normal way, while the remain-
ing section is used to play a second MIDI keyboard or tone generator
such as the Yamaha DOU-10 Disk Orchestra Unit. In this mode the
right-hand section of the keyboard is used to play an internal
Clavinova voice, while the left-hand section of the keyboard plays the
external keyboard or tone generator. Playing the left-hand section of
the keyboard produces no sound from the Clavinova. The “split
point,” or the key that divides the left- and right-hand sections of the
keyboard can be set at any desired key.
SPLIT POINT
▼
Left-hand section plays
a DOU-10 bass voice.
Right-hand section plays a
Clavinova piano voice.
MIDI/TRANSPOSE
P
SI-
R
D
PIPE
ORGAN
ZPress the [PIPE ORGAN] voice selector while holding down the
[MIDI/TRANSPOSE] button. The PIPE ORGAN LED will
flash.
XWhile still holding the [MIDI/TRANSPOSE] button, press the
key on the keyboard at which you want to set the split point. The
PIPE ORGAN LED will light continuously. The split-point
becomes the first key of the left-hand section.
CRelease the [MIDI/TRANSPOSE] button.
VTo return to the normal full-keyboard mode, hold the [MIDI/
TRANSPOSE] button and press the [PIPE ORGAN] voice
selector, then release both buttons.
NOTE
•When the power is turned ON the default split point key
— F
#
2 — will be automatically selected. If a new split
point is selected it remains active until the power is
turned OFF or a different split point is selected.
Bulk Data Dump.............................................................................................................................................................................
This function is used to transmit all data stored in the Recorder
memory to a MIDI data storage device such as the Yamaha DOU-10
Disk Orchestra Unit, other sequence recorders, or MIDI compatible
computers.
MIDI/TRANSPOSEREC
START/
STOP
RECORDER
ZHold [MIDI/TRANSPOSE] and press the [START/STOP]
button. Transmission will begin.
XRelease the buttons.
NOTE
•Bulk dump will not function when the metronome is on
or when the recorder is in operation.
DOU-10
OUT PUT
R
L
AUX IN
L
RMIDI OUT
MIDI
IN
Clavinova
(Set to receive on MIDI
channel 2)
The MIDI split mode is useful if, for example, you want to play a
piano (Clavinova) voice with the right hand while playing a synthe-
sizer bass line or string section with the left hand.
When the MIDI split mode is activated, notes played on the left-
hand section are transmitted via the Clavinova MIDI OUT connector
on MIDI channel 2. Notes played on the right-hand section are
transmitted on the “basic channel” (i.e. the channel set using the
MIDI channel selection function described previously).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha CLP311 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha CLP311 in the language / languages: English as an attachment in your email.
The manual is 0,46 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
