27512
52
Zoom out
Zoom in
Previous page
1/90
Next page
Detailed Settings – [FUNCTION]
CLP-240/230 Owner’s Manual
ENGLISH
52
You can change the volume of the metronome
sound.
Use this function to adjust the metronome vol-
ume.
1. Engage the Function mode and select
(CLP-240)/ (CLP-230).
2. Use the [–/NO] and [+/YES] buttons to set the
metronome volume as required.
Setting range: 1 – 20
Normal setting: 10
This function sets the volume at which a “can-
celed” part is played during song playback.
Adjust the part volume to a comfortable level
and use the “canceled” part as a guide with
which to play along.
1. Engage the Function mode and select
(CLP-240)/ (CLP-230).
2. Use the [–/NO] and [+/YES] buttons to set the
volume as required.
Setting range: 0 – 20
Normal setting: 5
You can make detailed adjustments to MIDI
settings.
For more information about MIDI, see the
“About MIDI” section (page 57).
1. Engage the Function mode and select
(CLP-240)/ (CLP-230).
2. Press the [+/YES] button to engage the MIDI
function’s sub-mode, then use the [TEMPO/
FUNCTION# , ] buttons to select the
desired sub-mode.
Press the [–/NO] or [+/YES] button to set a
selected parameter.
Sub-mode
F8.1:
(CLP-240)/F7.1: (CLP-230)
MIDI Transmit Channel Selection
In any MIDI control setup, the MIDI channels of the
transmitting and receiving equipment must be matched
for proper data transfer.
This parameter enables you to specify the channel on
which the Clavinova transmits MIDI data.
Setting range: 1 – 16, OFF (not transmitted)
Normal setting: 1
F6. (CLP-240) / F5. (CLP-230)
Metronome Volume
NOTE
SHORTCUT:
You can jump directly to the metronome functions (CLP-
240)/ (CLP-230) by pressing the [TEMPO/FUNCTION#]
button while holding the METRONOME [ON/OFF] button.
To exit the Function mode, you still need to press the [TEMPO/
FUNCTION#] button so that the TEMPO indicator lights up.
F7. (CLP-240) / F6. (CLP-230)
Song Part Cancel Volume
NOTE
This function cannot be used for Demo songs.
F8. (CLP-240) / F7. (CLP-230)
MIDI Functions
All MIDI settings described below will affect the MIDI signal
in and out of the USB [TO HOST] connector.
NOTE
In Dual mode, Voice 1 data is transmitted on its specified chan-
nel. In Split mode (CLP-240), right voice data is transmitted on
its specified channel. In Dual mode, Voice 2 data is transmitted
on the next greater channel number relative to the specified
channel. In Split mode (CLP-240), left voice data is transmitted
on the next greater channel number relative to the specified
channel. In either mode, no data is transmitted if the transmit
channel is set to “OFF.”
NOTE
Song data is not transmitted via the MIDI connections. However,
channels 3-16 of DOC songs, Disklavier Piano Soft songs, and
non-protected External songs will be transmitted via the MIDI
connections depending on the Song Channel Selection setting
(page 51).
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP230 in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP230

Yamaha CLP230 Installation Guide - English - 24 pages

Yamaha CLP230 User Manual - English - 14 pages

Yamaha CLP230 User Manual - English - 90 pages

Yamaha CLP230 User Manual - German - 14 pages

Yamaha CLP230 Installation Guide - German - 24 pages

Yamaha CLP230 User Manual - Dutch - 90 pages

Yamaha CLP230 User Manual - Danish - 90 pages

Yamaha CLP230 User Manual - French - 89 pages

Yamaha CLP230 User Manual - French - 14 pages

Yamaha CLP230 Installation Guide - French - 24 pages

Yamaha CLP230 User Manual - Italian - 90 pages

Yamaha CLP230 User Manual - Polish - 90 pages

Yamaha CLP230 User Manual - Portuguese - 90 pages

Yamaha CLP230 User Manual - Swedish - 90 pages

Yamaha CLP230 User Manual - Spanish - 89 pages

Yamaha CLP230 User Manual - Spanish - 14 pages

Yamaha CLP230 Installation Guide - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info