593334
27
Zoom out
Zoom in
Previous page
1/36
Next page
CLP-970 27
MIDI Data Format
2.2.1 XG bulk dump
This message sets XG-related parameters. Unlike parameter change messages, a single
message can modify multiple parameters. The message format is as follows.
11110000 F0H Exclusive status
01000011 43H YAMAHA ID
0000nnnn 0NH N:Device Number
01001100 4CH Model ID
0sssssss SSH ByteCountMSB
0ttttttt TTH ByteCountLSB
0ggggggg GGH Address High
0mmmmmmm MMH Address Mid
0lllllll LLH Address Low
0vvvvvvv VVH Data
: :
0kkkkkkk KKH Check-sum
11110111 F7H End of Exclusive
Address and Byte Count are given in tables 1-n. Byte Count is indicated by the total
size of the Data in tables 1-n.
Bulk dump and dump request messages are received when the beginning of the block
is specified as the 'Address'.
'Block' indicates the unit of the data string that is indicated in tables 1-n as 'Total size'.
Check sum is the value that produces a lower 7 bits of 0 when the Start Address, Byte
Count, Data, and the Check-sum itself are added.
2.2.1.1 XG System bulk dump
This message sets the XG SYSTEM block (refer to tables <1 -1>, <1 - 2>).
2.2.1.2 Multi Effect1 bulk dump
This message sets the MULTI EFFECT1 block (refer to tables <1 - 1>,
<1 - 3>).
2.2.1.3 Multi Part bulk dump
This message sets the MULTI PART block (refer to tables <1 - 1>, <1 - 4>).
2.2.1.4 Drums Setup bulk dump
This message sets the DRUMS SETUP block (refer to tables <1 - 1>, <1 - 5>).
3. Realtime messages
3.1 Active sensing
a) Transmission
not transmitted.
b) Receive
Once FE has been received, failure to receive any MIDI message for an interval
longer than approximately 300 msec will cause processing to be performed as if
ALL SOUND OFF, ALL NOTE OFF, and RESET ALL CONTROLLERS mes-
sages were received, and the unit will reset to a condition in which FE was never
received.
< Table 1-1 >
< Table 1-2 >
MIDI Parameter Change table ( XG SYSTEM )
Address Size Data Parameter Description Default value
(H) (H) (H) (H)
00 00 00 4 00 - 0F MASTER TUNE -102.4...0...+102.3[cent] 00 04 00 00
01 00 - 0F 1st bit3-0bit15-12
02 00 - 0F 2nd bit3-0bit11-8
03 00 - 0F 3rd bit3-0bit7-4
4th bit3-0bit3-0
04 1 00 - 7F MASTER VOLUME 0...127 7F
05 1 not used
06 1 28 - 58 TRANSPOSE -24...0...+24[semitones] 40
7D 1 N DRUM SETUP RESET N: Drum setup number(0,1) --
7E 1 00 XG SYSTEM ON 00=XG system ON (receive only) --
7F 1 00 ALL PARAMETER RESET 00=ON (receive only) --
TOTAL SIZE 07
Parameter Base Address
MODEL ID = 4C
Parameter Description
Address
(H) (M) (L)
XG SYSTEM 00 00 00 System
00 00 7D Drum setup Reset
00 00 7E XG System On
00 00 7F All Parameter Reset
EFFECT 1 02 01 00 Effect1(Reverb,Chorus,Variation)
MULTI PART 08
:
08
00
:
0F
00
:
00
Multi Part 1
:
Multi Part 16
DRUM 30
31
0D
0D
00
00
Drum Setup 1
Drum Setup 2
Address Parameter
3n 0D 00 note number 13
3n
3n
0E
:
5B
00
00
note number 14
:
note number 91
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP-970M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP-970M in the language / languages: German as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP-970M

Yamaha CLP-970M User Manual - English - 36 pages

Yamaha CLP-970M User Manual - English - 114 pages

Yamaha CLP-970M User Manual - German - 114 pages

Yamaha CLP-970M User Manual - Dutch - 114 pages

Yamaha CLP-970M User Manual - Danish - 113 pages

Yamaha CLP-970M User Manual - French - 114 pages

Yamaha CLP-970M User Manual - French - 36 pages

Yamaha CLP-970M User Manual - Italian - 116 pages

Yamaha CLP-970M User Manual - Swedish - 111 pages

Yamaha CLP-970M User Manual - Spanish - 36 pages

Yamaha CLP-970M User Manual - Spanish - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info