593332
21
Zoom out
Zoom in
Previous page
1/36
Next page
CLP-970A
21
MIDI Data Format
(3-5-1-2)UNIVERSAL NON REALTIME MESSAGE
(3-5-1-2-1) GENERAL MIDI SYSTEM ON
binary hexadecimal
11110000
F0 Exclusive status
01111110
7E Universal Non-Realtime
01111111
7F ID of target Device
00001001
09 Sub-ID #1=General MIDI Message
00000001
01 Sub-ID #2=General MIDI On
11110111
F7 End of Exclusive
or
11110000
F0 Exclusive status
01111110
7E Universal Non-Realtime
0xxxnnnn
XN When N is received N=0-F, whichever is
received.
When N is transmitted N always=0.
X = don’t care
00001001
09 Sub-ID #1=General MIDI Message
00000001
01 Sub-ID #2=General MIDI On
11110111
F7 End of Exclusive
Upon receiving an “On” message, System Mode is changed to “XG.All Control data val-
ues except for the master tuning setting are reset to the default values.
Executing this message takes about 50ms. There should be a sufficient interval between
this and the next message.
(3-5-2) XG STANDARD
(3-5-2-1)XG PARAMETER CHANGE
(3-5-2-1-1)XG SYSTEM ON
binary hexadecimal
11110000
F0 Exclusive status
01000011
43 YAMAHA ID
0001nnnn
1N Device Number
01001100
4C Model ID
00000000
00 Address High
00000000
00 Address Mid
01111110
7E Address Low
00000000
00 Data
11110111
F7 End of Exclusive
Upon receiving an “On” message, System Mode is changed to “XG.All Controllers are
reset, and all MultiPart data is shown in the table, and all “All System” data with (XG)
mark is reset to the default values.
Executing this message takes about 50ms. There should be a sufficient interval between
this and the next message.
(3-5-2-1-2) XG PARMETER CHANGE
binary hexadecimal
11110000
F0 Exclusive status
01000011
43 YAMAHA ID
0001nnnn
1N Device Number
01001100
4C Model ID
0aaaaaaa
AA Address High
0aaaaaaa
AA Address Mid
0aaaaaaa
AA Address Low
0ddddddd
DD Data
||
11110111
F7 End of Exclusive
If the data size of the parameter is 2 or 4, the amount of data that corresponds to the size is
transmitted.
Refer to the table on page 128 for more information on the address and parameters.
The following two types of data are transmitted and received. (The data is transmitted only
when Parameter Change Request is received.)
XG System Data
Multi Part Data
(3-5-3) SPECIAL OPERATORS
(3-5-3-1) SPLIT POINT
binary hexadecimal
11110000
F0 Exclusive status
01000011 43 YAMAHA ID
01110011 73 Clavinova ID
00000001
Common
00010001
11 Sub ID
00000000
00
00010100
14 Split Point
0ddddddd
DD Split Key No.
11110111
F7 End of Exclusive
(3-5-3-2) VOLUME,EXPRESSION AND PAN REALTIME CONTROL OFF
binary hexadecimal
11110000
F0 Exclusive status
01000011
43 YAMAHA ID
01110011
73 Clavinova ID
00000001
Common
00010001
11 Sub ID
0000nnnn
0N N = MIDI Channel
01001001
45 Volume and Expression Realtime Control Off
0vvvvvvv
VV Value VV: On=7FH, off=OOH
11110111
F7 End of Exclusive
After this Exclusive On message is received, any change to Volume and Expression
becomes effective only at the time of key on. When Exclusive Off message is received, the
settings return to normal.
(3-5-3-3) Panel Reverb Type
binary hexadecimal
11110000
F0 Exclusive status
01000011
43 YAMAHA ID
01110011
73 Clavinova ID
01101000
68 CLP-970A
00110001
31 Sub ID
00000000
don’t care
00000000
00 Panel Reverb Type
0ddddddd
DD DD: 0 (Room), 1(Hall1), 2(Hall2), 3(Stage), 4(Plate)
11110111
F7 End of Exclusive
(3-5-3-4) Panel Chorus Type
binary hexadecimal
11110000
F0 Exclusive status
01000011
43 YAMAHA ID
01110011
73 Clavinova ID
01101000
68 CLP-970A
00110001
31 Sub ID
00000000
don’t care
00000001
01 Panel Chorus Type
0ddddddd
DD DD: 0(Chorus), 1(Celeste), 2(Flanger)
11110111
F7 End of Exclusive
(3-5-3-5) Panel Variation Type
binary hexadecimal
11110000
F0 Exclusive status
01000011
43 YAMAHA ID
01110011
73 Clavinova ID
01101000
68 CLP-970A
00110001
31 Sub ID
00000000
don’t care
00000010
02 Panel Variation Type
0ddddddd
DD DD: 0(DelayLCR), 1(DelayLR), 2(Echo),
3(CrossDelay), 4(Symphonic), 5(RotarySpeaker)
6(Tremolo), 7(VibeRotor), 8(AutoPan),
9(Phaser), 10(AutoWah), 11(SoundBoardRev),
12(Off)
11110111
F7 End of Exclusive
(3-5-3-6) Vibe Rotor Control
binary hexadecimal
11110000
F0 Exclusive status
01000011
43 YAMAHA ID
01110011
73 Clavinova ID
01101000
68 CLP-970A
00110001
31 Sub ID
00000000
00 donÅft care
00001000
08 Vibe Rotor Control
0ddddddd
DD DD: On=7FH, Off=00H
11110111
F7 End of Exclusive
(3-5-3-7) Velocity Sense Depth
binary hexadecimal
11110000
F0 Exclusive status
01000011
43 YAMAHA ID
01110011
73 Clavinova ID
01101000
68 CLP-970A
00110001
31 Sub ID
00000000
00 don’t care
00001001
09 Velocity Sense Depth
0ddddddd
DD DD: 00H - 7FH
11110111
F7 End of Exclusive
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP-970AM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP-970AM in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP-970AM

Yamaha CLP-970AM User Manual - English - 104 pages

Yamaha CLP-970AM User Manual - Spanish - 36 pages

Yamaha CLP-970AM User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info