593325
37
Zoom out
Zoom in
Previous page
1/66
Next page
37
CLP-950/930
Connecting to a Personal Computer
Although the Clavinova can be connected to a personal computer via the
MIDI IN/OUT connectors and a MIDI interface, the TO HOST connector and
HOST SELECT switch allow direct connection to Apple Macintosh or IBM-PC/AT
personal computers for sequencing and other music applications without the
need for a separate MIDI interface.
Connect the TO HOST connector of the Clavinova to the modem or
printer port on your Macintosh, depending on which port your MIDI
software is using for MIDI data communication, using a standard
Macintosh 8-pin system peripheral cable. Set the HOST SELECT
switch to the “Mac” position.
You may also have to make other MIDI interface settings on the
computer side, depending on the type of software you use (refer to your
software owners manual). In any case the clock speed should be set to
1 MHz.
Connecting to an Apple Macintosh Series
Computer
................................................................................................................
Mac Cable Connections
2 (HSK i)1
1 (HSK 0)2
5 (RxD-)3
MINI DIN
8-PIN
4 GND4
3 (TxD-)5
8 (RxD+)6
7 (GP i)7
6 (TxD+)8
MINI DIN
8-PIN
8-pin system peripheral cable.
Data transfer rate: 31,250 bps.
NOTE
When connecting the Clavinova to a personal computer, first turn the power to both the Clavinova and the computer
OFF before connecting the cable and setting the HOST SELECT switch. After connecting the cable and making the
appropriate HOST SELECT switch setting, turn the power to the computer on first, then turn on the Clavinova.
When not using the [TO HOST] terminal of the Clavinova, make sure the cable is disconnected from the [TO HOST]
terminal. If the cable is left connected, the Clavinova may not function properly.
•“
HS(
will appear in the display if the host computer is not turned on, the connecting cable is not properly con-
nected, the HOST SELECT switch is not in the proper position, or the MIDI driver or MIDI application is not active. In
this case, turn the power off on both the Clavinova and the computer, and check the cable connection and the
position of the HOST SELECT switch. Once the connection and HOST SELECT switch position is verified, turn the
power of the computer on first, then the Clavinova, to check if the MIDI driver and MIDI application function properly.
When the HOST SELECT switch is set to Mac, PC-1, or PC-2, no data transfer occurs via the MIDI connectors.
To use the MIDI connectors for connection via a standard MIDI interface, set the HOST SELECT switch to MIDI.
HOST SELECTTO HOST
MIDIMac
PC-2PC-1
Apple Macintosh
Series Computer
Set to the Mac position.
CLP-930
The Clavinova-Computer Connection is a supplementary guidebook that describes, for
beginners, what you can do with your Clavinova and a personal computer and how to set up a
Clavinova-Computer system (the manual is not written for any specific models). The document
is available as a PDF file (in English) at the following Internet address:
Clavinova Home Page:
http://www.yamaha.co.jp/english/product/cl/
Yamaha Manual Library (Electronic Musical Instruments)
http://www2.yamaha.co.jp/manual/english/
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP-950 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP-950

Yamaha CLP-950 User Manual - English - 20 pages

Yamaha CLP-950 User Manual - German - 66 pages

Yamaha CLP-950 User Manual - Dutch - 64 pages

Yamaha CLP-950 User Manual - Danish - 62 pages

Yamaha CLP-950 User Manual - French - 66 pages

Yamaha CLP-950 User Manual - Italian - 57 pages

Yamaha CLP-950 User Manual - Portuguese - 32 pages

Yamaha CLP-950 User Manual - Swedish - 60 pages

Yamaha CLP-950 User Manual - Spanish - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info