593325
29
Zoom out
Zoom in
Previous page
1/66
Next page
29
CLP-950/930
F3
Dual Mode Functions
After selecting “F3.Y”, press the [+/YES] button to engage the dual-mode function sub-
mode, then use the [TEMPO/FUNCTION t, s] buttons to select the desired dual mode
function, as listed below.
If the Dual mode is not engaged “F3.-” will appear instead of “F3.Y” and the Dual mode
functions cannot be selected. If this happens engage the Dual mode and proceed.
SHORTCUT: You can jump directly to the dual-mode functions (F3) by pressing the
[FUNCTION] button while holding the two dual-mode voice selectors.
NOTE
Dual mode function settings are set individually for each voice combination.
F3.1: Dual Balance.....................................................................................................................................
The volume levels of the two voices combined in the dual mode can be adjusted as re-
quired by using this function. Use the [–/NO] and [+/YES] buttons to adjust the balance as
required. The balance range is from 0 through 20. A setting of “10” produces equal balance
between the two dual-mode voices. Settings below “10” increase the volume of the 2nd Voice
in relation to the 1st Voice, and settings above “10” increase the volume of the 1st Voice in
relation to the 2nd Voice (“1st” and “2nd” is explained on page 16). Press the [–/NO] and [+/
YES] buttons simultaneously to recall the default setting (different for each voice combina-
tion).
You can set one voice as the main voice, and another voice as a softer, mixed voice.
F3.2: Dual Detune .......................................................................................................................................
This function makes it possible to detune the 1st and 2nd dual-mode Voices to create a
thicker sound. Use the [–/NO] and [+/YES] buttons to set the amount of detuning as required.
The detune range is from –10 through 10. A setting of “0” sets both voices to the same pitch.
“+” values raise the pitch of the 1st voice while lowering the pitch of the 2nd voice, and “-”
values raise the pitch of the 2nd voice while lowering the pitch of the 1st voice. (“1st” and
“2nd” is explained on page 16). Press the [–/NO] and [+/YES] buttons simultaneously to
recall the default setting (different for each voice combination).
NOTE
The maximum amount of pitch variation increases toward the lower key range (
±
60 cents at the A-1
key), and decreases toward the higher key range (
±
5 cents at the C7 key). 100 cents = 1 semitone.
F3.3: 1st Voice Octave Shift .............................................................................................................
F3.4: 2nd Voice Octave Shift ...........................................................................................................
Depending on which voices you combine using the dual mode, the combination may sound
better if one of the voices is shifted up or down an octave. Use the [–/NO] and [+/YES]
buttons to set the octave of the 1st or 2nd Voice as required (“1st” and “2nd” is explained on
page 16). The available settings are “0” for normal pitch, “–1” to shift the pitch down one
octave, and “1” to shift the pitch up one octave. Press the [–/NO] and [+/YES] buttons simul-
taneously to recall the default setting (different for each voice combination).
The Function Mode
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP-950 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP-950

Yamaha CLP-950 User Manual - English - 20 pages

Yamaha CLP-950 User Manual - German - 66 pages

Yamaha CLP-950 User Manual - Dutch - 64 pages

Yamaha CLP-950 User Manual - Danish - 62 pages

Yamaha CLP-950 User Manual - French - 66 pages

Yamaha CLP-950 User Manual - Italian - 57 pages

Yamaha CLP-950 User Manual - Portuguese - 32 pages

Yamaha CLP-950 User Manual - Swedish - 60 pages

Yamaha CLP-950 User Manual - Spanish - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info