593324
26
Zoom out
Zoom in
Previous page
1/66
Next page
26
CLP-950/930
Playback
To play back what you’ve recorded, first make sure that the green track indica-
tors of the tracks you want to play are lit. If not, press the corresponding track
button(s) so that they are lit. Then press the SONG [START/STOP] button.
Playback starts from the beginning of the recorded data, and will stop automati-
cally at the end of the recorded data. You can also stop playback at any time by
pressing the SONG [START/STOP] button.
To mute a track so that it doesn’t play back, press the corresponding track
button so that its indicator goes out (press again to turn the track back on).
The current measure number appears on the display during playback.
It is possible to play along on the keyboard during playback. In this case, the playback
voice and the voice you play on the keyboard are not the same. The playback voice is
the voice that was set when the data was recorded. The voice you play on the keyboard
is the voice that is selected on the panel.
The playback volume and tempo can be adjusted by using the [MASTER VOLUME]
control and [TEMPO/FUNCTION
,
] buttons (press both [TEMPO/FUNCTION
,
]
buttons simultaneously to recall the default tempo).
All user song recorder data will be retained in memory for about one week after the
power is turned off. If you want to keep your recorded data for longer periods, turn the
power on for a few minutes at least once a week. It is also possible to store it to an
external MIDI storage device such as the Yamaha MIDI Data Filer MDF3 by using the
Bulk Data Dump function described on page 35.
The track indicators will not light automatically when the power is turned on even if the
user song recorder contains data. It is therefore necessary to press the track buttons so
that the corresponding green indicators light before starting recorder playback. It is also
a good idea to press the track buttons to check if the tracks contain data before
recording. If the green indicator lights when the corresponding track button is pressed,
that track contains data which will be erased and replaced by the newly-recorded data.
If the metronome is being used during playback, the metronome will automatically stop
when playback is stopped.
During recorder playback, the volume of a track which is turned off will always be 0
(i.e. the Preset Song Part Cancel Volume function page 32 only affects preset
song playback.
The playback data is not transmitted via the MIDI OUT connector.
Playback cannot be started when the demo/preset song mode is engaged.
Playback cannot be started when the recorder contains no data, or when both track
buttons are off.
If the REVERB type is changed via the panel controls during playback, both the
playback and keyboard reverb effects will be changed.
If the EFFECT type is changed via the panel controls during playback, the playback
effect may be switched off in some cases.
When the Synchro Start function is engaged, recorder playback will begin
automatically as soon as you start playing on the keyboard.
To engage the Synchro Start function press the SONG [START/STOP] button
while holding a track button which is ON. The rightmost dot on the display will
flash at the current tempo. (Repeat the previous operation to disengage the Syncro
Start function.) Playback will then start as soon as you begin playing on the key-
board.
If you hold a track button which is OFF while pressing the SONG [START/STOP]
button, that track will be turned ON and the Synchro Start mode will be engaged.
Synchro Start ............................................................................................................................
Left Pedal Start/Stop .........................................................................................................
The left pedal can be assigned to start and stop recorder playback via the “Left Pedal
Mode” function described on pages 31 (CLP-930) and 32 (CLP-950). This is conve-
nient for starting playback of the recorded part anytime after you have started playing.
ESET
O
NG
TRACK
1
TRACK
2
START/
STOP
REC
SONG
ESET
NG
TRACK
1
TRACK
2
START/
STOP
REC
SONG
TEMPO/FUNCTION/SONG
Using the User Song Recorder
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP-930 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP-930 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP-930

Yamaha CLP-930 User Manual - English - 20 pages

Yamaha CLP-930 User Manual - German - 66 pages

Yamaha CLP-930 User Manual - Dutch - 64 pages

Yamaha CLP-930 User Manual - Danish - 62 pages

Yamaha CLP-930 User Manual - French - 66 pages

Yamaha CLP-930 User Manual - Italian - 57 pages

Yamaha CLP-930 User Manual - Portuguese - 32 pages

Yamaha CLP-930 User Manual - Swedish - 60 pages

Yamaha CLP-930 User Manual - Spanish - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info