ZSimultaneously press and hold the A-1 and C#0 keys.
XPress the key on the keyboard corresponding to the desired MIDI transmit or receive
channel.*
CRelease the A-1 and C#0 keys.
*Keys C1 through D#2 on the keyboard are used to set the MIDI transmit channel. The E2
key turns transmission “OFF” if you don’t want the Clavinova to transmit MIDI data. Keys
C4 through D#5 are used to set the MIDI receive channel as shown in the illustration
below. The E5 key sets the receive mode to “ALL”.
NOTE
•When the power is initially turned ON, MIDI receive is set to the ALL mode and
the transmit channel is set to 1.
•In the dual mode the left-button voice will be transmitted on the specified transmit
channel number while the right-button voice will be transmitted on the next
channel number (i.e. the specified transmit channel number + 1). Neither voice
will be transmitted when the transmit channel is set to “OFF.”
•Demo song data is not transmitted via MIDI.
•No MIDI reception occurs when the demo song mode is engaged.
•Program change and other like channel messages received will not affect the
Clavinova’s panel settings or what is being played on the keyboard.
MIDI Functions
Local Control ON/OFF.............................................................................................................................................................
“Local Control” refers to the fact that, normally, the Clavinova keyboard controls its
internal tone generator, allowing the internal voices to be played directly from the keyboard.
This situation is “Local Control ON” since the internal tone generator is controlled locally by
its own keyboard.
Local control can be turned OFF, however, so that the Clavinova keyboard does not play
the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT
connector when notes are played on the keyboard. At the same time, the internal tone generator
responds to MIDI information received via the MIDI IN connector.
When using the DOU-10 Disk Orchestra Unit with the Clavinova, for example, Local
Control should be turned OFF when recording using the DOU-10 voices only, and ON when
recording the Clavinova voices while listening to playback of the DOU-10 voices.
ZSimultaneously press and hold the A-1 and C#0 keys.
XPress the C6 key to switch the Local Control between OFF and ON.
CRelease the A-1 and C#0 keys.
NOTE
•When the power is initially turned ON, Local Control is set to “ON”.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha CLP-920 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha CLP-920 in the language / languages: English as an attachment in your email.
The manual is 1,65 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
