593301
35
Zoom out
Zoom in
Previous page
1/72
Next page
31
CLP-811/611 Configuration Functions (FUNCTION mode)
Subfunctions
6.1 ****** (Organ type) [ Where “******” is replaced by
the type name, such as “JAZZ ORGAN1”. If the selected
type has been edited, a “*” appears after the name.]
Values: JAZZ ORGAN1, JAZZ ORGAN2, JAZZ OR-
GAN3, JAZZ 16 '1', BASIC 16 '8', THEATER 16',
OLD ORGAN, WONDERFUL
Default: JAZZ ORGAN1
6.2 VoiceEdit (Voice edit settings)
Each voice allows you to set independent volumes for eight
continuous tones and three decaying attack tones. You can also
set a response time (for the continuous tones) and an attack
length (for the decay tones).
Tones and Volumes
The 8-foot stop sets the volume for the fundamental tone.
The 4-foot, 2-foot, and 1-foot stops respectively set volumes
for the overtones that are one octave, two octaves, and three
octaves up. The 16-foot stop sets the volume for the tone that
is one octave lower than the fundamental tone.
Response Time and Attack Length
Procedure
1 Go to the [6.2 VoiceEdit] screen, and then press SONG
SELECT [] or [] to move into the editing component.
The screen displays a bar graph. Each bar corre-
sponds to a different parameter, and can be set to any
of eight levels.
2 You can now use SONG SELECT [], [] to move from
bar to bar, and the [+/YES] and [-NO] buttons to change
the bar levels. The currently selected bar is displayed in
blinking mode.
3 When you are finished editing, you can press [t] or [s]
to move to another subfunction.
Edit parameters are as follows.
Footage 16' (Continuous-tone volume)
Footage 8' (Continuous-tone volume)
Footage 5+1/3' (Continuous-tone volume)
Footage 4' (Continuous-tone volume)
Footage 2+2/3' (Continuous-tone volume)
Footage 2' (Continuous-tone volume)
Footage 1+1/3' (Continuous-tone volume)
Footage 1' (Continuous-tone volume)
Response (Response time for continuous tones)
AtkFootage 4' (Decay-tone)
AtkFootage 2+2/3' (Decay-tone)
AtkFootage 2' (Decay-tone)
AtkLength (Length of decay tones)
6.3 AtkMode (Attack mode)
This parameter sets the attack mode for the organ voice
selected by subfunction 6.1. Choose either of the following.
EACH: Apply attack tones to all notes. (This is the
default.)
FIRST: Apply attack tones only to the first held note of
any note combination (legato sequence). If at
least one key is down, all subsequent keys are
produced without attack tones.
6.4 RotSP.Spd (Speed of rotary-speaker effect)
6.5 RotSP.Dpt (Depth of rotary-speaker effect)
Values: 0,...,20
Default: Varies according to organ type
These parameters set up the rotary-speaker effect. The speed
setting selects the speaker’s rotation speed. The depth setting
selects the intensity of the effect.
6.6 ResetOK? (Return to factory defaults.)
Press [+/YES] to return all of the edit settings for the selected
voice type to their factory defaults.
NOTE
As a shortcut, you can switch directly into
FUNCTION mode’s F6.OrganEdit area by
holding down the [ORGAN COMBINATION]
button and pressing [FUNCTION]. When you
are ready to exit from FUNCTION mode, press
[FUNCTION] once again.
BRILLIANCE
REVERB
NORMAL
ROOM
EFFECT TOUCH
MEDIUM
TEMPO
16'
8'
5+1/3'
4'
2+2/3' 2+2/3'
Footage
Response AtkLength
2'
1+1/3'
1'
4' 2'
AtkFootage
Each parameter (each bar on the graphic) can be set to any of eight levels.
Selected bar flashes on and off.
16'
8'
5+
1
/
3
'
4'
2+
2
/
3
'
2'
1+
1
/
3
'
1'
4'
2+
2
/
3
'
2'
Continuous tones Decay tones
4-foot
2+2/3-foot
2-foot
4-foot
2+2/3-foot
2-foot
1+1/3-foot
1-foot
16-foot
8-foot
5+1/3-foot
Volume
Time
Attack length
Longer attack length
Greater response time
Volume
Time
Continuous Tone Decay Tone
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP-811 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP-811 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP-811

Yamaha CLP-811 User Manual - German - 71 pages

Yamaha CLP-811 User Manual - French - 71 pages

Yamaha CLP-811 User Manual - Portuguese - 56 pages

Yamaha CLP-811 User Manual - Swedish - 56 pages

Yamaha CLP-811 User Manual - Spanish - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info