590832
33
Zoom out
Zoom in
Previous page
1/72
Next page
29
CLP-811/611 Configuration Functions (FUNCTION mode)
F4.DualFunc. (Settings for DUAL mode.)
You use this function to set various parameters for
DUAL-mode play.
1 To access this function: first activate DUAL mode (by
pressing two voice selectors at the same time), then
press [FUNCTION], and then press [t] or [s] to
proceed to F4.
2 Next, press [+/YES] to enter the subfunction group.
Then use [t], [s] to move among the different
subfunctions, and [-/NO], [+/YES] to set the values.
NOTE
If you are not working in DUAL mode...
The top right of the screen will display a triple
dash (---) and you will not be able to enter the
subfunction group. To enable entry, activate
DUAL mode by pressing two voice selectors at
the same time. (You can do this without leaving
FUNCTION mode).
Subfunctions
4.1 D.Balance (Voice volume balance)
Settings: 0,...,20 [10 = equal balance]
[Above 10, Voice 1 is louder.]
Default: Varies according to voice combination
Sets the relative volumes for the two voices. This function is
useful when you want to highlight one voice while playing the
other as a backdrop.
4.2 D.Detune (Voice tuning divergence)
Introduces slight pitch difference between the two voices,
producing a somewhat fatter sound.
Values: -10,...,+10 [0: No detuning]
[0 +10: Voice
#
1 pitch rises]
[0 -10: Voice
#
2 pitch rises]
Default: Varies according to voice combination
4.3 Vc1.Octave (Octave shift for Voice #1)
4.4 Vc2.Octave (Octave shift for Voice #2)
Values: -1, 0, +1
Default: Varies according to voice combination
These subfunctions allow you to shift each voice up or down
an octave. Each combination produces its own distinctive
sound and acoustics.
4.5 Vc1.EffDpt (Effect depth for Voice #1)
4.6 Vc2.EffDpt (Effect depth for Voice #2)
Values: 0,...,20
Default: Varies according to voice combination
These subfunctions allow you to set the depth for each voice’s
effect. Setting is not available if the effect is set OFF. Note that
you cannot change a voice’s effect selection while working in
FUNCTION mode; you must first return to normal mode.
NOTE
“Voice
#
1” is identified by the first (left-side)
voice name on the screen. For information about
how the Clavinova selects the voice order, see
page 17.
4.7 Str.Atk (Attack speed for STRINGS voice)
Values: SLOW, FAST
Default: FAST
Sets the attack speed (the initial rise speed) for the STRINGS
voice. A SLOW attack can create an interesting ambience for
certain types of songs. (Note that this setting is effective only if
STRINGS is selected as one of the voices.)
4.8 ResetOK? (Return to factory defaults.)
Press [+/YES] to return all of the DUAL-mode subfunction
settings to the factory defaults. (Factory defaults are different
for each voice combination.)
NOTE
As a shortcut, you can switch directly into
FUNCTION mode’s F4.DualFunc. area by
holding down the two appropriate voice selectors
and pressing [FUNCTION]. Once you have
changed the settings, press [FUNCTION] again
to quit the mode.
F5.SplitFunc. (Settings for SPLIT mode.)
You use this function to set various parameters for
SPLIT-mode play.
1 To access this function: first enter SPLIT mode, then
press [FUNCTION], and then press [t] or [s] to
proceed to F5.
2 Next, press [+/YES] to enter the subfunction group.
Then use [t], [s] to move among the different
subfunctions, and [-/NO], [-/YES] to set the values.
NOTE
If you are not working in SPLIT mode when you
enter the main F5 screen...
The top right of the screen will display a triple
dash (---) and you will not be able to enter the
subfunction group. To enable entry, you must first
quit FUNCTION mode and press the [SPLIT]
button.
Subfunctions
5.1 SplitPoint (Split point)
Values: Any key on keyboard
Default: F
#
2
Selects the split point. The selected key becomes the top note
of the left zone.
Once you are at this screen, you can select the split point
simply by pressing the appropriate key.
To set the split point without entering FUNCTION mode:
Hold down [SPLIT] and press the appropriate key, see page
18.
BRILLIANCE
REVERB EFFECT TOUCH
NORMAL
ROOM
MEDIUM
TEMPO
21
BRILLIANCE
REVERB EFFECT TOUCH
NORMAL
ROOM
MEDIUM
TEMPO
21
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP-611 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP-611 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP-611

Yamaha CLP-611 User Manual - German - 71 pages

Yamaha CLP-611 User Manual - French - 71 pages

Yamaha CLP-611 User Manual - Portuguese - 56 pages

Yamaha CLP-611 User Manual - Swedish - 56 pages

Yamaha CLP-611 User Manual - Spanish - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info