590746
104
Zoom out
Zoom in
Previous page
1/126
Next page
104
CLP-585/575/545/535/565GP Owner’s Manual
Troubleshooting
When a message is displayed, refer to the “Message List” (page 102) for troubleshooting aid.
Problem Possible Cause and Solution
The instrument does not turn
on.
The instrument has not been plugged in properly. Securely insert the female plug into the socket on the
instrument, and the male plug into a proper AC outlet (page 14).
A click or pop is heard when
the power is turned on or off.
This is normal when electrical current is being applied to the instrument.
The power is automatically
turned off.
This is normal and due to the Auto Power Off function. If necessary, set the parameter of the Auto Power Off
function (page 93).
The message “USB device
overcurrent error” is shown
and the USB device does not
respond.
Communication with the USB device has been shut down because of the overcurrent to the USB device.
Disconnect the device from the USB [TO DEVICE] terminal, then turn on the power of the instrument.
Noise is heard from the
speakers or headphones.
The noise may be due to interference caused by the use of a mobile phone in close proximity to the instrument.
Turn off the mobile phone, or use it further away from the instrument.
Noise is heard from the
instrument’s speakers or
headphones when using the
instrument with the
application on iPhone/iPad.
When you use the instrument along with the application on your iPhone/iPad, we recommend that you set
“Airplane Mode” to “ON” on your iPhone/iPad in order to avoid noise caused by communication.
The overall volume is low, or
no sound is heard.
The Master Volume is set too low; set it to an appropriate level using the [MASTER VOLUME] slider (page 19).
The volume level for the keyboard performance is set too low. Adjust the volume balance to increase the
keyboard volume via the Song Menu display: “Volume” “Song - Keyboard” (page 47.)
Headphones are connected when the Speaker setting is “Normal” (page 92). Disconnect the headphone plug.
The Speaker setting is “Off.” Set the Speaker to “Normal” via the System Menu display: “Utility” “Speaker”
(page 92.)
Local Control is “Off.” Set Local Control “On” via the System Menu display: “MIDI” “Local Control” (page 91.)
“Expression” is assigned to the right pedal or the AUX pedal (CLP-585). Assign any function other than
“Expression” to the pedal (page 82) via the Voice Menu display: “Pedal Assign” “Right” (page 82) or the
System Menu display: “Pedal” “Aux Assign” (CLP-585) (page 90.)
The speakers do not switch
off when a pair of
headphones is connected to
the [PHONES] jack.
The Speaker setting is “On.” Set the speaker setting to “Normal” via the System Menu display: “Utility”
“Speaker” (page 92.)
Pedals do not function. The pedal cord may not be securely connected to the [PEDAL] jack. Be sure to insert the pedal cord all the way
until the metal part of the cord plug disappears from view (pages 109, 113, 115 or 118).
(CLP-585)
The on/off setting of the pedal
connected to the AUX PEDAL
jack is reversed.
Some types of pedals may turn on and off in opposite fashion. Set to the appropriate parameter via the System
Menu display: “Pedal” “Aux Polarity” (page 90.)
The keyboard volume is
lower than the Song playback
volume.
The volume level for the keyboard performance is set too low. Adjust the volume balance to increase the
keyboard volume via the Song Menu display: “Volume” “Song - Keyboard” (page 47.)
The buttons do not respond. While you are using a function, some buttons not used for the function are disabled. If the Song is playing, stop
playback. Otherwise, press the [EXIT] button to return to the Voice or Song display, Then, perform the desired
operation.
Higher or lower notes do not
sound correctly when the
transpose or octave setting is
made.
This instrument can cover the range of C -2 – G8 when you set the transposition or octave. If notes lower than C
-2 are played, the sound is moved one octave higher. If notes higher than G8 are played, the sound is moved
one octave lower.
Performance in Dual or Split
mode is not recorded, or part
data is lost unexpectedly.
Switching to Dual mode or Split mode in the middle of the Song is not recorded. Also, the recording part for the
Voice 2 (Dual mode) or the left-hand Voice (Split mode) is automatically assigned (page 53). If the assigned part
already has data, the data will be overwritten and deleted when you record.
The Song title is not correct. The “Language” setting may be different than that is selected when you named the Song. Also, if the Song was
recorded on another instrument, the title might be displayed incorrectly. Set the “Language” parameter (page
93) via the System Menu display: “Utility” “Language” “Song” to change the setting. However, if the Song
was recorded on another instrument, changing the “Language” parameter setting may not resolve the problem.
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP-535 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP-535 in the language / languages: English as an attachment in your email.

The manual is 19,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP-535

Yamaha CLP-535 User Manual - English - 2 pages

Yamaha CLP-535 User Manual - English - 14 pages

Yamaha CLP-535 User Manual - German - 126 pages

Yamaha CLP-535 User Manual - German - 14 pages

Yamaha CLP-535 User Manual - Dutch - 128 pages

Yamaha CLP-535 User Manual - Danish - 128 pages

Yamaha CLP-535 User Manual - French - 8 pages

Yamaha CLP-535 User Manual - French - 126 pages

Yamaha CLP-535 User Manual - French - 14 pages

Yamaha CLP-535 User Manual - Italian - 128 pages

Yamaha CLP-535 User Manual - Polish - 128 pages

Yamaha CLP-535 User Manual - Portuguese - 128 pages

Yamaha CLP-535 User Manual - Swedish - 128 pages

Yamaha CLP-535 User Manual - Turkish - 128 pages

Yamaha CLP-535 User Manual - Spanish - 128 pages

Yamaha CLP-535 User Manual - Spanish - 14 pages

Yamaha CLP-535 User Manual - Spanish - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info