590692
28
Zoom out
Zoom in
Previous page
1/54
Next page
24
The Function Mode
F4.2: Split Balance.....................................................................................................................................
The volume levels of the two voices combined in the split mode can be adjusted as re-
quired by using this function. Use the [–/NO] and [+/YES] buttons to adjust the balance as
required. The balance range is from 0 through 20. A setting of “10” produces equal balance
between the two split-mode voices. Settings below “10” increase the volume of the left-hand
voice in relation to the right-hand voice, and settings above “10” increase the volume of the
right-hand voice in relation to the left-hand voice. Press the [–/NO] and [+/YES] buttons
simultaneously to recall the default setting (different for each voice combination).
F4.3: Right Voice Octave Shift......................................................................................................
F4.4: Left Voice Octave Shift..........................................................................................................
Depending on which voices you combine using the split mode, the combination may sound
better if one of the voices is shifted up or down an octave. Use the [–/NO] and [+/YES]
buttons to set the octave of the left-hand or right-hand voice as required. The available settings
are “0” for normal pitch, “–1” to shift the pitch down one octave, and “1” to shift the pitch up
one octave. Press the [–/NO] and [+/YES] buttons simultaneously to recall the default setting
(different for each voice combination).
F4.5: Right Voice Effect Depth......................................................................................................
F4.6: Left Voice Effect Depth..........................................................................................................
These functions make it possible to individually set the depth of the chorus effect for the
left-hand and right-hand split-mode voices. Use the [–/NO] and [+/YES] buttons to set the
effect depth for the corresponding voice as required. The depth range is from 0 through 20. A
setting of “0” produces no effect, while a setting of “20” produces maximum effect depth.
Press the [–/NO] and [+/YES] buttons simultaneously to recall the default setting (the default
effect depth setting is different for each voice).
NOTE
The effect depth settings cannot be changed unless the EFFECT is ON. The Function mode must be
exited before EFFECT can be turned ON.
F4.7: Damper Mode...................................................................................................................................
The Damper Mode function determines whether the damper pedal affects the right voice,
the left voice, or both the left and right voices in the split mode. Use the [–/NO] and [+/YES]
buttons to select “2” for the left voice, “1” for the right voice, or “ALL” for both voices. Press
the [–/NO] and [+/YES] buttons simultaneously to recall the default setting: “ALL”.
F4.8: Reset .........................................................................................................................................................
This function resets all split-mode functions to their default values. Press the [+/YES]
button to reset the values. “End” will appear on the display when all functions have been
reset.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP-411 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP-411 in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP-411

Yamaha CLP-411 User Manual - German - 56 pages

Yamaha CLP-411 User Manual - French - 56 pages

Yamaha CLP-411 User Manual - Portuguese - 36 pages

Yamaha CLP-411 User Manual - Swedish - 41 pages

Yamaha CLP-411 User Manual - Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info