590641
75
Zoom out
Zoom in
Previous page
1/108
Next page
Connections
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
ENGLISH
75
Connecting a Personal Computer
By connecting a computer to the Clavinova’s USB [TO HOST] terminal, you can transfer data
between the instrument and the computer via MIDI. To do this, install the USB-MIDI driver and
Musicsoft Downloader software (refer to the included “Accessory CD-ROM Installation Guide”).
CAUTION
When connecting the Clavinova to a personal computer, first turn off the power to both the Clavi-
nova and the computer before connecting any cables. After making connections, turn on the
power to the computer first, then to the Clavinova.
CAUTION
If you are not using the connection between the Clavinova and your computer, you must discon-
nect the cable from the USB [TO HOST] terminal. The Clavinova may not operate correctly if a
cable is left connected.
Use a USB cable to connect the USB port on your computer to the USB [TO HOST]
terminal on the Clavinova.
TERMINOLOGY
Driver:
A driver is software that provides
a data-transfer interface between
the computer’s operating system
and a connected hardware
device. You need to install a USB
MIDI driver to connect the com-
puter and the instrument.
NOTE
The instrument will begin trans-
mission a short time after the
USB connection is made.
When using a USB cable to
connect the instrument to your
computer, make the connec-
tion directly without passing
through a USB hub.
For information on setting up
your sequence software, refer
to the owner’s manual of the
relevant software.
Precautions when using the USB [TO HOST] terminal
When connecting the computer to the USB [TO HOST] terminal, make sure to observe the
following points. Failing to do so risks freezing the computer and corrupting or losing the
data. If the computer or the instrument freezes, restart the application software or the com-
puter OS, or turn the power to the instrument off then on again.
CAUTION
Use an AB type USB cable of less than about 3 meters.
Before connecting the computer to the USB [TO HOST] terminal, exit from any power-sav-
ing mode of the computer (such as suspended, sleep, standby).
Before turning on the power to the instrument, connect the computer to the USB [TO
HOST] terminal.
Execute the following before turning the power to the instrument on/off or plugging/
unplugging the USB cable to/from the USB [TO HOST] terminal.
- Quit any open application software on the computer.
- Make sure that data is not being transmitted from the instrument. (Data is transmitted
only by playing notes on the keyboard or playing back a song.)
While the computer is connected to the instrument, you should wait for six seconds or
more between these operations: (1) when turning the power of the instrument off then on
again, or (2) when alternately connecting/disconnecting the USB cable.
USB
TO DEVICE
TO HOST
USB [TO HOST] terminal
USB cable
Computer
Instrument
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP-370 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP-370 in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP-370

Yamaha CLP-370 Additional guide - English - 4 pages

Yamaha CLP-370 User Manual - English - 20 pages

Yamaha CLP-370 Installation Guide - English - 9 pages

Yamaha CLP-370 User Manual - English - 3 pages

Yamaha CLP-370 User Manual - English - 14 pages

Yamaha CLP-370 Installation Guide - German - 8 pages

Yamaha CLP-370 User Manual - German - 108 pages

Yamaha CLP-370 User Manual - German - 3 pages

Yamaha CLP-370 User Manual - German - 14 pages

Yamaha CLP-370 User Manual - Dutch - 108 pages

Yamaha CLP-370 User Manual - Danish - 108 pages

Yamaha CLP-370 Installation Guide - French - 8 pages

Yamaha CLP-370 User Manual - French - 108 pages

Yamaha CLP-370 User Manual - French - 3 pages

Yamaha CLP-370 User Manual - French - 14 pages

Yamaha CLP-370 User Manual - Italian - 108 pages

Yamaha CLP-370 User Manual - Polish - 108 pages

Yamaha CLP-370 User Manual - Portuguese - 108 pages

Yamaha CLP-370 User Manual - Swedish - 108 pages

Yamaha CLP-370 Installation Guide - Spanish - 8 pages

Yamaha CLP-370 User Manual - Spanish - 108 pages

Yamaha CLP-370 User Manual - Spanish - 3 pages

Yamaha CLP-370 User Manual - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info