590578
36
Zoom out
Zoom in
Previous page
1/44
Next page
Keyboard Stand Assembly
CLP-320 Owner’s Manual
36
ENGLISH
6. Connect the pedal cord.
6-1 Insert the pedal cord plug to the pedal con-
nector from the rear.
6-2 Attach the cord holders to the rear panel as
shown, then clip the cord into the holders.
6-3 Use a vinyl tie to take up any slack in the
pedal cord.
7. Connect the power cord to the
unit.
7-1 Set the voltage selector (for models that fea-
ture a voltage selector).
7-2 Connect the plug on the power cord to the
rear panel connector.
WARNING
An improper voltage setting can cause serious damage to
this instrument or result in improper operation.
8. Set the adjuster.
9. Attach the headphone hanger.
Use the included two screws 5 (4 × 10mm) to
attach the hanger as shown in the illustration
below.
Voltage Selector
Before connecting the AC power cord, check the set-
ting of the voltage selector which is provided in some
areas. To set the selector for 110V, 127V, 220V or 240V
main voltages, use a “minus” screwdriver to rotate the
selector dial so that the correct voltage for your region
appears next to the pointer on the panel. The voltage
selector is set at 240V when the unit is initially
shipped. After the proper voltage has been selected,
connect the AC power cord to the AC IN and an AC
wall outlet. A plug adaptor may be also provided in
some areas to match the pin configuration of the AC
wall outlets in your area.
N
LET
PEDAL
6-1
6-3
6-2
240
127
110
220
Rotate the adjuster until it comes in firm contact with the
floor surface.
PHONES
34
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP-320PE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP-320PE in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP-320PE

Yamaha CLP-320PE User Manual - English - 20 pages

Yamaha CLP-320PE Quick start guide - English - 2 pages

Yamaha CLP-320PE User Manual - English - 14 pages

Yamaha CLP-320PE User Manual - German - 14 pages

Yamaha CLP-320PE User Manual - German - 43 pages

Yamaha CLP-320PE User Manual - Dutch - 43 pages

Yamaha CLP-320PE User Manual - Danish - 43 pages

Yamaha CLP-320PE User Manual - French - 43 pages

Yamaha CLP-320PE User Manual - French - 14 pages

Yamaha CLP-320PE User Manual - Italian - 43 pages

Yamaha CLP-320PE User Manual - Polish - 43 pages

Yamaha CLP-320PE User Manual - Portuguese - 43 pages

Yamaha CLP-320PE User Manual - Swedish - 43 pages

Yamaha CLP-320PE User Manual - Spanish - 43 pages

Yamaha CLP-320PE User Manual - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info