590511
16
Zoom out
Zoom in
Previous page
1/45
Next page
16
Disk Playback
Performance data on the supplied PianoSoft demonstration disk (others are available from Yamaha), as
well as original performances you record using the Clavinovas Recorder function (page 18) can be played
back as described below.
Insert the disk containing the data to be played back into the disk
drive, with the sliding door facing the drive slot and the label side facing
upward. The disk should click into place and the disk lamp will light
briefly while the Clavinova reads and identifies the disk. Song number
“1” will also appear on the display.
NOTE
Any recorded data in the CLP-156 memory (i.e. data recorded with-
out first inserting a disk) will be erased when:
(1) the supplied PianoSoft demonstration disk or an optional
PianoSoft disk is inserted.
(2) a disk containing original performance data is inserted and the
Select a Song Number operation, below, is carried out.
If you want to keep the data that is in the instruments memory, copy
it to a recordable disk as described on page 20 before doing any of
the above.
Use the SONG [r] and [f] buttons to select the song number you
want to play. Select “ALL” if you want all songs on the disk to be played
back in sequence. When the desired song number is selected the [1/R]
and [2/L] track button indicators will glow green if the corresponding
tracks contain performance data.
NOTE
The songs can be made to play back and repeat either in sequence
or in random order when ALL is selected, depending on the setting
of the All-song Random Repeat function (page 28).
Start playback of the selected song by pressing the [PLAY] button.
Unless “ALL” is selected, the selected song will play through to the end
and playback will stop automatically. The current measure number will
be shown on the display during playback. It is also possible to play along
on the keyboard during playback.
NOTE
The measure number display may not be accurate with some songs.
It is possible to change the playback voice by using the panel voice
selectors during playback of the supplied PianoSoft demonstration
disk or an optional Disklavier PianoSoft disk. In this case the play-
back voice will become the same as the voice played via the key-
board. The playback voice cannot be changed when playing back
other types of disks (the keyboard voice can be changed).
Adjust the playback volume as required via the [MASTER VOL-
UME] control.
Although playback will stop automatically at the end of the song, it
can be stopped at any time by pressing the [PLAY] button.
When you’ve finished with the currently loaded disk, simply press the
disk drive EJECT button to remove it.
CAUTION
NEVER eject a disk or turn the power off while the disk drive lamp is
on or a disk is playing back.
Z Insert a Disk
1
NEject the Disk When Done
X Select a Song Number
2
RECORDER
1/R
2/L
PLAY
REC
SONG
f
r
C Start Playback
1
RECORDER
1/R
2/L
PLAY
REC
V Adjust the Volume
BStop Playback
MASTER VOLUME
MIN MAX
PLAY
REC
Song Number
Measure Number
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP-156 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP-156 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info