18187

Yamaha CDRS1000 Manual

33
Zoom out
Zoom in
Previous page
1/38
Next page
E-30
ADDITIONAL INFORMATION
English
Can’t Copy
Digital recording cannot be performed. (See “SCMS copy
protection” on page 32.)
Disc Full
Recording is not possible because there is no blank space
remaining on the disc.
Track Full
Recording is not possible because the maximum number
of 99 tracks has already been recorded on the disc.
Not Audio
The inserted disc is not an audio CD-R or CD-RW disc.
OPEN
The disc tray is being opened.
CLOSE
The disc tray is being closed.
Standby
The recorder has been put in the record pause mode from
either the stop or record mode, and information is being
written to the disc’s PMA (Program Memory Area).
Never turn the power off when this is displayed.
Wait
The recorder has been put in the stop mode from the
record mode and information is being written to the PMA
(Program Memory Area). Never turn the power off when
this is displayed.
Erase LAST?
Erases the last track on a CD-RW disc.
If you want to erase the last track, press ^ (PLAY # on
the remote).
Erase ALL?
Erases all tracks on a CD-RW disc.
If you want to erase all tracks, press ^ (PLAY # on the
remote).
Check Disc
This is displayed when the recorder stops after reading
disc information, while performing an erase procedure,
finalization, or OPC. If this occurs, the disc may be dirty
or possibly even damaged. Remove the disc and inspect it.
Data Track
This is displayed when the data track is played back.
Display messages
Erase DISC?
Erases all of the information a CD-RW disc.
If you want to erase all of the information, press ^
(PLAY # on the remote).
Erase TOC?
Erases the TOC (Table Of Contents) on a CD-RW disc.
If you want to erase the TOC, press ^ (PLAY # on the
remote).
Finalize OK?
Finalizes the CD.
If you want to finalize the disc, press ^ (PLAY # on
the remote).
Finalized
Recording has been attempted on a CD-RW disc that has
already been finalized.
No Input
The digital input is selected, but the connections are not
correct, or the digital signal is not being output from the
source device. Please check all cabling, and the status of
the source device.
Reading
When the recorder is turned on or a disc is loaded, the
recorder reads the format of the disc loaded in the
recorder.
OPC Adjust
Adjustments performed when OPC (Optimum Power
Calibration) optimizes the laser power to the reflectivity
of the disc. Some time is required to complete these
automatic adjustments.
No Disc
There is no disc in the disc tray.
New Disc
The disc in the disc tray is either a new CD-R or CD-RW
disc or a CD-RW disc that has been erased using the
Erase ALL or Erase DISC function.
TOC
During the finalization process, the TOC (Table Of
Contents) is being written onto the disc.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CDRS1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CDRS1000 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CDRS1000

Yamaha CDRS1000 User Manual - Dutch - 36 pages

Yamaha CDRS1000 User Manual - French - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info