18187
20
Zoom out
Zoom in
Previous page
1/38
Next page
E-17
RECORDING FUNCTIONS
Setting the digital recording level
The volume level of digital audio sources is often similar,
however, level differences may be quite obvious between
different digital audio sources and even between one
recording and another. To maintain a consistent recording
level in CD recordings, it is possible to change the volume
of the input digital signal.
Please note that the digital recording level cannot be
adjusted when the CD DIRECT function is on (the CD
DIRECT indicator is lit on the front panel).
To select the digital signal to be recorded, set INPUT to
the appropriate digital input (OPTICAL or COAXIAL).
To set the digital recording level, play the digital source to
be recorded during record or record pause mode, and turn
REC LEVEL DIGITAL/ANALOG to adjust the volume
of the digital signal to a level that sounds appropriate. The
digital volume can be adjusted up to a MAX of +12 dB
and down to a MIN of –12 dB from the center position of
0 dB, the level of the input digital signal.
Notes
Although some sources can be recorded with lower peak
levels, setting the peak levels too low may degrade the quality
of the recording.
By pressing CD DIRECT (the CD DIRECT indicator lights on
the front panel), the digital level is automatically set to that of
the CD disc being recorded, and turning REC LEVEL
DIGITAL/ANALOG has no effect.
L
R
dB
60 30 10 6 4 2 1 0 OVER00
––
Should not light
Setting the
recording levels
NATURAL SOUND CD RECORDER CDR-S1000
POWER
FINALIZE ERASE DISPLAY
TRACK NO.
EFFECT
REC MODE
OPEN/CLOSE
CD DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
INPUT
REC LEVEL
DIGITAL/ANALOG
Setting the analog recording level
To select the analog signal, set INPUT to ANALOG.
Turn REC LEVEL DIGITAL/ANALOG during record or
record pause mode to adjust the analog recording level.
For best results, play the loudest passage of the source to
be recorded and watch the recording level meter in the
display. Adjust REC LEVEL DIGITAL/ANALOG so
that the highest peak causes the 0 dB level indicators to
flicker. Do not set the recording level so that the OVER
indicators light as it may produce distortion in the audio
signal.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CDRS1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CDRS1000 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CDRS1000

Yamaha CDRS1000 User Manual - Dutch - 36 pages

Yamaha CDRS1000 User Manual - French - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info