18181
77
Zoom out
Zoom in
Previous page
1/106
Next page
E-71
English
COPYING AND RECORDING ONTO A CD-R OR CD-RW DISC
ERASING A CD-RW DISC
You can erase the data recorded on a CD-RW disc. New recordings can be made in the space created by erasing. The following 4 types of
erasing are possible with this unit.
Last Track Erase
This operation erases the last track on a disc. Last Track Erase
cannot be performed if a CD-RW disc has been finalized, or only
one track has been recorded on the disc.
1. Load the CD-RW disc to be erased.
2. Press ERASE.
The following message appears on the display.
Go to the next step when erasing only the last track. To erase
other tracks as well, select the track number to start erasing
from by rotating the MULTI JOG knob.
To cancel erasing, press a.
3. Press w/d (w on the remote control) to start erasing.
Erasing flashes on the display, and the level meter shows the
erasing progress.
4. This unit enters the stop mode when erasing has
been completed.
All Track Erase
This operation erases all tracks recorded on a CD-RW disc. TOC
will be erased also if a CD-RW disc has been finalized.
1. Load the CD-RW disc to be erased.
2. Press ERASE repeatedly until Erase ALL ? appears
on the display.
To cancel erasing, press a.
3. Press w/d (w on the remote control) to start erasing.
Erasing flashes on the display, and the level meter shows the
erasing progress.
4. This unit enters the stop mode when erasing has
been completed.
Track to start erasing from Last track
Erase Last ?
TRACK
CDR W
L
R
dB 30 10 6 20
Erase 2- 9?
TRACK
CDR W
L
R
dB 30 10 6 20
Erase ALL ?
CDR W
L
R
dB 30 10 6 20
TOC Erase
This operation is only available on a CD-RW disc that has been
finalized. After the Table of Contents (TOC) has been erased, the
effects of finalization are defeated, and further recording is
possible.
1. Load the CD-RW disc that has been finalized.
2. Press ERASE.
Erase TOC ? appears on the display.
To cancel erasing, press a.
3. Press w/d (w on the remote control) to start erasing.
Erasing flashes on the display, and the level meter shows the
erasing progress.
4. This unit enters the stop mode when erasing has
been completed.
Note
The TOC indicator turns off when TOC Erase has been
completed.
Disc Erase
This operation erases all information recorded on a CD-RW disc.
1. Load the CD-RW disc to be erased.
2. Press and hold ERASE for approximately 2 seconds.
Erase Disc ? appears on the display.
To cancel erasing, press a.
3. Press w/d (w on the remote control) to start erasing.
Erasing flashes on the display, and the level meter shows the
erasing progress.
4. This unit enters the stop mode when erasing has
been completed.
Cautions
Never turn off the power of this unit during erasing.
If Check Disc appears on the display during erasing, and
erasing stops, there may be dust or damage on the CD-RW disc.
Check the CD-RW disc and start the erasing operation again.
Erasing a disc takes approximately 20 minutes.
Erase TOC ?
TOC
CDR W
L
R
dB 30 10 6 20
Erase Disc ?
CDR W
L
R
dB 30 10 6 20
107_HD1300(E)60-71 02.6.24, 6:52 PM71
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CDRHD1300E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CDRHD1300E in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CDRHD1300E

Yamaha CDRHD1300E User Manual - German - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info