18181
73
Zoom out
Zoom in
Previous page
1/106
Next page
E-67
English
COPYING AND RECORDING ONTO A CD-R OR CD-RW DISC
You can record from an external component directly to a CD-R or CD-RW disc. Following is an explanation for digital recording from an
external CD player connected to the DIGITAL IN (OPTICAL) or DIGITAL IN (COAXIAL) jacks on this unit.
Note
Before starting to record, check the remaining time available for recording on the CD-R or CD-RW disc (see page 11).
RECORDING FROM AN EXTERNAL COMPONENT ONTO A CD-R OR CD-RW DISC
NATURAL SOUND HDD
/
CD RECORDER
TEXT/TIME MODE
MULTI JOG
DIGITAL REC LEVEL
PUSH ENTER
TRACK NO.
FINALIZE ERASE
BOOKMARK
COMPLETE
MENU
CLEAR
MIN MAX
OPTICAL
ANALOG REC LEVEL
INPUT
REC
COAXIAL
ANALOG
COPY
A.M.Q.R.
CDRHDD
MIN MAX
LEVELPHONES
POWER
4
4
1
1
63 82 9
OPEN/CLOSE
COPY REC
TEXT/TIME
TRACK NO.
WRITE
MODE MENU
CLEAR
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQR
7
STU
8
VWX
9
YZ
SPACE
SYMBOL
0 +10
BOOKMARK
REPEAT RANDOM NTRO
ENTER
COMPLETE
A.M.Q.R.
FINALIZE
INPUT
TIMER REC
ERASE
4
JKL
5
MNO
6
PQR
7
STU
8
VWX
9
YZ
SPACE
SYMBOL
0 +10
BOOKMARK
REPEAT RANDOM
GROUP SKIP
INTRO
HDD CDR
1
6
8
9
2
3
4
6
4
4
1. Load a new CD-R or CD-RW disc, or a CD-R or CD-
RW disc without finalization.
Press v (OPEN/CLOSE on the remote control) to open the
disc tray, and place a CD-R or CD-RW disc with its recordable
side facing down. Then press v (OPEN/CLOSE on the remote
control) to close the disc tray.
2. Press REC.
OPC may start on the loaded CD-R or CD-RW disc depending
on its recording condition. It takes approximately 15 seconds to
complete the adjustment.
If this unit determines that OPC is not needed for the disc
loaded, Standby flashes on the display.
The following message appears on the display and this unit
enters the recording pause mode.
Note
If you leave this unit in the recording pause mode for
approximately 5 minutes, this unit returns to the stop mode
automatically.
3. Select the input source to be recorded.
When making a digital recording from an external CD player,
press INPUT until the OPTICAL or COAXIAL indicator
lights up.
When making an analog recording...
Press INPUT until the ANALOG indicator lights up.
OPC Adjust
REC
CDR
L
R
dB 30 10 6 20
SYNC
Standby
REC
CDR
L
R
dB 30 10 6 20
SYNC
1 000
REC
CDR
L
R
dB 30 10 6 20
SYNC
4. Adjust the recording level.
The adjustment of the digital recording level is not normally
necessary. However it is possible to adjust the recording level
to suit your needs.
Play the loudest passage (highest sound level) of the source to
be recorded.
By pressing MENU, the display changes for the level
adjustment. Rotate the MULTI JOG knob (press +/ on the
remote control) to adjust the recording level. When the
adjustment is completed, press MULTI JOG knob (ENTER on
the remote control) to confirm the adjusted recording level.
When making an analog recording...
Rotate the ANALOG REC LEVEL control to adjust the
recording level.
Note
Adjust the recording level so that the red part on the peak
level meter does not light at the loudest sound levels.
See Adjusting the Recording Level on page 24 for details.
5. Select a recording mode.
If you wish to record only one track, select Multi Synchro
and set to 1 track for the number of tracks to be recorded.
If you wish to start and stop recording, and place track markers
automatically, select All Synchro.
If you wish to automatically make finalization on a CD-R or
CD-RW disc as well, select Full Auto.
See Setting the recording mode on page 69 for details.
107_HD1300(E)60-71 02.6.24, 6:51 PM67
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CDRHD1300E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CDRHD1300E in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CDRHD1300E

Yamaha CDRHD1300E User Manual - German - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info