18181
48
Zoom out
Zoom in
Previous page
1/106
Next page
E-42
TRACK EDITING
3. Press COMPLETE.
The new track beginning point is set.
Playback resumes from the beginning of the adjusted track.
Notes
If the adjusted track includes a part that cannot be copied digitally
before adjusting, the adjusted track itself cannot be copied
digitally either.
When the emphasis status of the track to be adjusted is different
from that of the previous track, the emphasis status of the track to
be adjusted takes precedence over that of the previous track.
Track Erase
You can erase a selected track.
Editing during the stop mode
1. Select and confirm Track Erase in step 5 of Editing
during the stop mode on page 39.
The following message appears on the display.
The disc number that contains the track to be erased flashes.
2. Select the disc that contains the track to be erased
by rotating the MULTI JOG knob (pressing +/ on the
remote control).
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc that contains the track to
be erased.
The number of the track to be erased flashes.
Press CLEAR to cancel the confirmed selection.
4. Select the track to be erased by rotating the MULTI
JOG knob (pressing +/ on the remote control).
Before Track Adjust is performed
After Track Adjust has been performed (The beginning
of track 2 is adjusted earlier.)
12
12
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track to be erased.
Press CLEAR to cancel the confirmed selection.
To check the track to be erased, press w/d (w on the remote
control). This unit starts to play the track to be erased
repeatedly.
6. Press COMPLETE.
The selected track is erased.
This unit returns to the editing menu item selection.
Editing during playback
1. Select and confirm Track Erase in step 2 of Editing
during playback on page 39.
The track being played is confirmed to be erased.
2. Press COMPLETE.
The track being played is erased.
Playback resumes from the beginning of the next track after the
erased track. If no track follows the erased track, this unit plays
the previous track of the erased track.
Note
The number of the track that has been erased will be available for
future use.
Erase 001 1?
GROUP
L
R
dB 30 10 6 20
Track to be erased
Disc that contains the track to be erased
105_HD1300(E)39-51 02.6.24, 6:51 PM42
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CDRHD1300E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CDRHD1300E in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CDRHD1300E

Yamaha CDRHD1300E User Manual - German - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info