18179

Yamaha CDRD651 Manual

21
Zoom out
Zoom in
Previous page
1/219
Next page
E-20
RECORDING FUNCTIONS .....................................................
■ CD TEXT editing
This unit can edit CD TEXT data on the disc to be used for
recording. Each name can contain up to 23 characters
using capital and lower case letters of the alphabet,
numbers, and symbols. CD TEXT data editing should be
complete before finalization is performed. Once the disc is
finalized, CD TEXT data editing is not possible.
Making a name using the MULTI JOG knob
1.
Load a disc that you wish to enter a name for on
disc tray B.
To make a disc name, press and rotate the MULTI
JOG knob to select “Disc Name” in the set menu while
this unit is in the stop mode. To make a track name,
select “Track Name” in the set menu by rotating the
MULTI JOG knob. Then select the track that you wish
to enter a name for using y while this unit is in the
stop mode. Follow the steps described below to
complete a disc and track name.
2.
When the MULTI JOG knob is pressed, a cursor
appears in the display. Rotate the MULTI JOG
knob to select the character you wish to use from
the character selection. Press the knob when you
find the desired character.
Press the knob again to enter the character. Character
selection appears in the display in the order of
alphabet capital letters, alphabet lower case letters,
numbers, and symbols. Rotate the MULTI JOG knob
clockwise or counterclockwise to find the desired
character.
3.
After the character is selected, press the knob to
enter the character entry and move the cursor to
the next space.
Repeat this step to complete the name. Each name
can contain up to 23 characters.
4.
After all characters are entered, press and hold
the MULTI JOG knob for 2 seconds to enter the
name.
Making a name using the remote control
1.
Repeat step
1
in “Making a name using the
MULTI JOG knob” to select “Disc name” or “Track
name” and press EDIT while this unit is in the
stop mode. Then the cursor appears in the
display.
2.
Select the characters to be used using the
numeric buttons.
Alphabet capital letters, alphabet lower case letters,
and numbers switch each time the buttons are
pressed. To make a space, press SPACE. To use a
symbol, press SYMBOL to select the desired symbol.
3.
Select the next character with the appropriate
button.
When using the same button, move the cursor to the
next space by pressing y. Repeat the steps
described above to complete a name. Each name can
contain up to 23 characters.
4.
After all characters are entered, press SET to
enter the name.
To correct names
Press t or y for the disc tray B (t or y on the
remote) to move the cursor to the character to be corrected.
Press ERASE (ERASE or DELETE on the remote) or select
the correct character and press SET to enter the new name.
■ Editing on the disc
After the disc name or track name is complete, the TOC
indicator blinks in the display. Perform finalization in order
to record this CD TEXT data on the disc. (See the next page
for the finalization procedure.) You will then have a
complete disc with CD TEXT data.
Notes
• CD TEXT data is normally edited while this unit is in the stop
mode. However it is possible to edit the disc name and track
name for the track being played or recorded. In this case,
perform finalization after pressing a when editing is complete.
• When editing is complete, if you attempt to open the disc tray
before finalization is performed, “TEXT Save?” appears in the
display. In this case, press w/d (w on the remote) twice to start
finalization. If the disc tray is opened by pressing v (OPEN/
CLOSE on the remote), the edited CD TEXT data will be lost.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CDRD651 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CDRD651 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CDRD651

Yamaha CDRD651 User Manual - English - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info