E-18
Random play
Tracks on a selected disc or all discs on the disc table can be
played back in a random order.
1 Load discs and close the disc table.
2 If necessary, switch the disc play mode by pressing the
disc play MODE selector button.
* If the single disc play mode is selected, select a desired
disc by pressing the DISC SKIP button.
3 Press the RANDOM button to begin random play.
* The “RANDOM” indicator will light up.
To cancel the random play
Press the stop button, or press the RANDOM button
again. The “RANDOM” indicator will go out.
Note
This feature will not function during programming, or during
program play.
Switching the time display
Each time the TIME button is pressed, the display will
change as described below.
[Example]
When the second track is being played back (Refer to the
illustration on the left.)
➀ The elapsed play time for the track now playing back will
be displayed.
* 8 seconds have passed since the beginning of the
second track.
➁ The remaining play time for the current track will be
displayed.
* 2 minutes and 58 seconds remain till the end of the
second track.
➂ The total play time of the disc will be displayed.
(If the unit is in the program play mode, the total play time
of the programmed tracks will be displayed.)
➃ The total remaining play time from the point being played
at that time will be displayed.
* 41 minutes remain till the end of the disc.
Notes
•
During random play, the total remaining play time on the
disc will not be displayed.
•
The remaining play time will not be displayed for track
number 20 or higher.
•
If track number 20 or higher is programmed, during the
program play, the total play time and the total remaining
play time will not be displayed.
COMPACT DISC PLAYER OPERATION
