Dubbing (by using KXW-S70 only)
•
During dubbing, adjusting the VOLUME, BALANCE,
TREBLE and BASS controls have no effect on the
recorded sound.
•
Try to use the same tape formula and length for the
recording tape as for the master tape.
1 Press the TAPE input selector button.
2 Load a prerecorded tape into the DECK A cassette
compartment. Insert a blank tape into the DECK B
cassette compartment.
3 Set the reverse mode switch to to record on only one
side, or to (or ) for continuous recording on both
sides.
4 Press the DUBBING button.
* Press “NORMAL” to dub at normal speed, and “HIGH”
to dub at about twice the normal speed.
* Dubbing will begin from side A regardless of the side
now selected.
To stop dubbing
Press the stop button.
* Tape A and tape B will stop at the same time.
Note
Only tapes originally encoded with Dolby B or C NR will be
dubbed onto tapes with Dolby B or C NR encoding.
The Dolby NR switch will have no effect on the recording of
tape B during dubbing.
However, the playback tonal quality of tape A will change
according to the Dolby NR switch position.
Erasing recorded tapes
11 Load the tape to be erased into the cassette
compartment.
(For KXW-S70, load a tape into the DECK B cassette
compartment.)
22 Press the TAPE input selector button.
33 Set the reverse mode switch to to erase only one
side and to (or ) to
erase both sides.
44 Press the REC/PAUSE button, then press the play
button to erase side A of the tape, or the play button to
erase side B.
39
OTHER RECORDINGS
