586883

Yamaha CBXK2 Manual

27
Zoom out
Zoom in
Previous page
1/44
Next page
27
When power
is turned on
Program
Change is
selected.
Group A Functions — List
Select MSB/LSB; see corresponding Group A functions). Then, hold
down C and press the N or M
button. (Hold down the appropriate button to change the value
continuously.) To directly change the value (decimal or hexadecimal)
for the displayed function, hold down C , enter the value, then
press L.
*8 The connected device initializes itself upon reception of this message.
*9 When a MIDI error results, MIDI Merge is automatically set to OFF.
*10 • When RPN or NRPN is assigned, the Wheel or Slider is automati-
cally set to control Data Entry and will change the relevant
parameter on the connected device.
Range (Hexadecimal Default
in parentheses) setting MIDI Code Notes
- - <<FC>> *2
- - <<FB>> *2
- - <<FA>> *2
0, 20-300(0, 14-12C) 0(oFF) <<F8>> *2, *4
MSB:000-127(00-7F) MSB:000 <<Bn 00 msb, Bn 20 LSB, Cn pp>> *5, *7
LSB:000-127(00-7F) LSB:000
1-128(1-80) 1 <<Cn pp>> *6, *7
- - <<F0 7E 7F 09 01 F7>> *8
- - <<Bn 78 00>>
- - <<F0 43 1s 4C 00 00 7E 00 F7>> *8
on, oFF on -*9
1-16(1-10) 1 - *3
0, 1-127(0, 1-7F) 0(oFF)-
MSB:000-127(00-7F) - <<Bn 64 LSB, Bn 65 MSB, Bn 06 vv>> *5, *10
LSB:000-127(00-7F) Refer to the Controller list on page 30.
0-158(0-9E) 1 <<Bn gg vv>>etc.. *10
Refer to the Controller list on page 30.
MSB:000-127(00-7F) - <<Bn 62 LSB, Bn 63 MSB, Bn 06 vv>> *5, *10
LSB:000-127(00-7F) Refer to the Controller list on page 30.
0-127(00-7F) 0 -
0-12(0-C) 0 - *11
0-12(0-C) 0 - *11
MSB:000-127(00-7F) - <<Bn 64 lsb, Bn 65 msb, Bn 06 vv>> *5, *10
LSB:000-127(00-7F) Refer to the Controller list on page 30.
0-158(0-9E) 6 <<Bn gg vv>>etc.. *10
Refer to the Controller list on page 30.
MSB:000-127(00-7F) - <<Bn 62 lsb, Bn 63 msb, Bn 06 vv>> *5, *10
LSB:000-127(00-7F) Refer to the Controller list on page 30.
0-127(00-7F) 0 -
Toggles among -
the three settings.
-
-
Explanation
Stop command for sequencer/rhythm machine.
Continue command for sequencer/rhythm machine.
Start command for sequencer/rhythm machine.
Tempo entry for sequencer/rhythm machine. Setting to 0 disables the MIDI clock transmission.
When Assignable Wheel or Slider is set to Tempo (158), this is inactive.
This allows selection of voice banks on tone generators that support multiple banks. This
message must include both MSB and LSB values.
Transmits the selected program change number. Stepping up or down through program
numbers is also possible by holding down C and using the N/
M buttons (page 16).
This resets the connected tone generator to GM operation. Caution: Be careful when using
this, since it automatically changes whatever settings you’ve made on the tone generator.
(Only GM compatible tone generators respond to this message.)
This turns all sounds off over the current MIDI channels. To turn all sounds off for all MIDI
channel, use All Sounds Off in Group B.
This resets the connected tone generator to XG operation. Caution: Be careful when using
this, since it automatically changes whatever settings you’ve made on the tone generator.
(Only XG compatible tone generators respond to this message.)
When set to ON, this merges all data received at MIDI IN with the data generated by the
CBX-K2. Merge can be set independently for each channel in the Group B. (For details about
MIDI Merge, refer to page 34.)
This determines the MIDI transmit channel for the CBX-K2. This should be set to match the
MIDI receive channel of the connected MIDI device.
This sets a fixed velocity value for the keyboard; in other words, playing the keyboard at any
strength results in a certain velocity value. When this is set to 0 or “oFF”(initial touch on),
Touch sensitivity can be set in the Group B .
When the Assignable Wheel or Slider is set to Velocity(157), this is inactive.
This determines the RPN (Registered Parameter Number) controller for the Assignable Wheel.
The message must include both MSB and LSB values.
This determines the Controller number for the Assignable Wheel. Though not all are listed on
the panel, any of the standard Control Change numbers (0 - 119) can be assigned. (For a
complete list of the available controllers and their numbers, see on page 30.)
This determines the controller by using NRPN ( Non-Registered Parameter Number) for the
Assignable Wheel. Refer to the Controller list on page 30. The message must include both
MSB and LSB values.
This determines the drum number for use with the Wheel and the assigned drum-related
control number (136 - 151). The following alternate operation can also be used: C +
F → [note number (of desired drum sound)] → L
This lowers the key transposition by the specified amount (in semitones).
This raises the key transposition by the specified amount (in semitones).
This determines the RPN (Registered Parameter Number) controller for the Assignable Slider.
The message must include both MSB and LSB values.
This determines the Controller number for the Assignable Slider. Though not all are listed on
the panel, any of the standard Control Change numbers (0-119) can be assigned. (For a
complete list of the available controllers and their numbers, see on page 30.)
This determines the NRPN (Non-Registered Parameter Number) controller for the Assignable
Slider. The message must include both MSB and LSB values. (Refer to the Controller list on
page 30.)
This determines the drum number for use with the Slider and the assigned drum-related
control number (136 - 151). The following alternate operation can also be used: C +
F → [note number (of desired drum sound)] → L
Changes the LED display to show the currently selected program number.
Changes the LED display to show the currently selected Bank Select MSB value.
Changes the LED display to show the currently selected Bank Select LSB value.
• To send a specific value for the current control number assignment
of the Wheel or Slider, hold down C, enter the desired value,
and press L. However, this cannot be done with the following
controller numbers: 153 (Key Pressure), 157 (Velocity), or 158
(Tempo).
• The assigned MSB and LSB values alternately appear in the LED
display. When no value is assigned, “---” is shown in the display.
*11 Transpose can be done in two ways: by repeatedly pressing
G or H key or by entering the transpose
value directly after pressing G or H key.
To restore the normal transpose setting, hold C and press both
fl keys simultaneously.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CBXK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CBXK2 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CBXK2

Yamaha CBXK2 User Manual - German - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info