652998
48
Zoom out
Zoom in
Previous page
1/372
Next page
44 En
Troubleshooting
Picture
Sound
Problem Possible causes and solutions
No picture. Make sure that the cables are connected correctly (p. 12).
Make sure that the connected TV or the AV receiver is set to the correct input.
With no disc inserted, or playback stopped, press and hold and on the front
panel simultaneously to set video resolution to the default value.
If a picture is still not output, press and hold on the front panel for approximately 5
seconds to switch NTSC/PAL.
When set to Disc Native, a signal that is not compatible with the connected TV is
output. Change the setting to output a signal that is compatible with the connected TV
(p. 37).
Make sure that the disc or file you are trying to play back is compatible with this Player
(p. 3).
Disable the CD mode and Pure Direct mode (p. 23).
Screen freezes and operation buttons
do not work.
Press , then restart playback.
Turn off the power and turn on the power again.
Press and hold p on the front panel for more than 5 seconds to reset this Player.
Video is not output with the desired
resolution.
Set to the desired resolution (p. 37).
Wide-screen video appears vertically
stretched, or black bands appear at the
top and bottom of the screen. Or 4:3
video appears horizontally stretched.
Change the aspect ratio of your TV (p. 37).
Square noise (mosaic) appears on the
screen.
Blocks in images may be visible in scenes with rapid movement due to the
characteristics of digital image compression technology.
Problem Possible causes and solutions
No sound, or sound is distorted. Check that the audio cable is connected correctly (p. 12).
Turn the volume of TV or AV receiver up.
There is no sound during still mode, fast forward, and fast reverse (p. 9).
Audio may not be output depending on the audio recording status, such as when audio
other than an audio signal or non-standard audio is recorded for the audio content (p. 3).
Make sure that the disc or file you are trying to play back is compatible with this Player
(p. 3).
If the sound is interrupted during playback in the CD mode, disable the CD mode
(p. 23).
Left and right channels of audio are
reversed, or sound comes out of only
one side.
Check the audio connection (p. 14).
Cannot hear the desired audio type and/
or number of channels.
Refer to Audio Output setting and “Audio output formats” (p. 39, p. 41).
Cannot hear the sound of PIP
(secondary audio).
Set Coaxial / Optical or HDMI to PCM/Reencode (p. 39).
To hear secondary audio, press 2ND AUDIO (p. 9).
Depending on the disc, you may need to set secondary audio on the top menu of the disc
(p. 8).
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha BD-S681 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha BD-S681 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info