12 3 4 5
67 8 9 0 A
CONTROLS AND THEIR FUNCTIONS
1 POWER switch
Press this switch to switch the power on. Press it again to
switch the power off.
* Standby mode
<Europe and U.K. models only>
While the power is on, pressing the POWER key on the
remote control transmitter switches the unit to the standby
mode. (In this mode, the power indicator is half illuminated.)
2 Power indicator
Lights up while the power is on.
3 Remote control sensor
Receives signals from the remote control transmitter.
4 Input selector buttons and indicators
Select a program source to listen to. The indicator above the
selected button (source) will light up.
5 CD DIRECT AMP switch
Press this switch inward to listen to a CD source in the purest
sound. (Refer to page 10 for details.)
6 PHONES jack
When you listen with headphones, connect the headphones to
the PHONES jack. When listening with
headphones privately, set both the
SPEAKERS A and B switches to the
OFF position.
7 SPEAKERS switches
Set the switch A or B (or both A and B) for the speaker system
(connected to this unit) you will use to the ON position. Set the
switch for the speaker system you will not use to the OFF
position.
8 Tone controls
BASS
Used to increase or decrease the low frequency response.
The 0 position produces flat response.
TREBLE
Used to increase or decrease the high frequency response.
The 0 position produces flat response.
9 BALANCE control
Adjusts the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
0 Continuously variable LOUDNESS control
Used to compensate for the human ears’ loss of sensitivity to
high and low-frequency ranges at low volume.
A VOLUME control
Used to raise or lower the volume level.
