19268
31
Zoom out
Zoom in
Previous page
1/40
Next page
29
EnglishREMOTE CONTROL APPENDIXPREPARATION OPERATION
TROUBLESHOOTING
Be sure to investigate thoroughly before requesting repairs or after service. If it cannot be corrected, or if the problem is not
listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center.
Notes
Sometimes the unit may cease to recognize operations due to a mistaken operation or as a result of strong external noise (such as irregular
voltage due to shock of impact, excessive static electricity, or lightning strike). If this happens, first disconnect the power cord, wait about
30 seconds, re-connect the power cord, and try the desired operation again.
When requesting repairs or after service of the YAMAHA subwoofer and rear speakers NX-SW70 (sold separately), be sure to bring along
with this unit.
General
SYMPTOM CHECK Refer to page
When using a DSP program
SYMPTOM CHECK Refer to page
When using the remote control
SYMPTOM CHECK Refer to page
No sound output at all.
Is the AC power supply cord connected?
Is the TV or VCR connected correctly?
Is the input source selected correctly?
Has this unit’s audio temporarily been lowered?
A “humming” noise is present.
Hum caused by external electromagnetic waves may be generated.
Try inverting the right-left polarity of the power cord and re-insert into
the AC outlet.
The STANDBY indicator
flashes slowly.
The unit is in Auto Power Off mode.
Turn off the main power if the unit is not to be used for an extended
period of time.
There is noise in the tuner or
TV and the video image is
unstable.
Is a tuner or TV that uses an indoor antenna located near the unit?
Use of an outdoor antenna is recommended.
Movie dialog and other audio
is difficult to hear.
Are you using one of the DSP programs CONCERT or SPORTS?
Select the other program.
The remote control does not
function properly.
Are the batteries used up?
Is the remote control pointed at the sensor?
Is the remote control too far from or too close to the sensor?
Is direct sunlight or other intense light (such as an inverter fluorescent
lamp) striking the sensor?
Is another remote control being used at the same time?
Have the batteries been inserted in the correct direction?
Cannot control other
component.
Has the correct manufacturer code been set?
14
10 – 12
17
18
14
21
19, 20
3
3
3
3
3
2
23
Has the remote control selector button “S70” been pressed? Press “S70”
when you want to control this unit after controlling another component.
Has the remote control selector button corresponding to the component to
be controlled been pressed?
26, 27
0105AV-S70_23-30_EN 3/29/0, 4:04 PM29
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha AVS70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha AVS70 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info