713087
61
Zoom out
Zoom in
Previous page
1/74
Next page
l The volume is too low.
Turn up the volume of the subwoofer. For details, see the
following:
– “Basic procedure for playback” (p.27)
l The front side of the subwoofer is blocked.
Clear the area around the front side and the bass reflex port of
the subwoofer.
l [When the * indicator on the subwoofer flashes.]
The center unit and subwoofer are not connected due to a
bad wireless communication status.
– Move the subwoofer closer to the center unit.
If the issue is not resolved, move the subwoofer to a location
that supports better communication (one in which the *
indicator glows).
– If the communication between the center unit and subwoofer
is obstructed by a metallic object or another object, change
the position of the center unit and subwoofer or change the
installation location of the subwoofer.
– If there is a device (microwave oven, wireless LAN, etc.) that
emits radio frequency signals, move the center unit and
subwoofer away from the device.
l [When the * indicator on the subwoofer flashes.]
The center unit and subwoofer are not paired.
Pair the center unit and subwoofer manually. For details, see the
following:
– “Pairing the center unit and subwoofer manually” (p.52)
If a wireless connection is not established, the unit may be
malfunctioning. Unplug the power cords from the AC wall
outlets and contact the nearest authorized Yamaha dealer or
service center.
The volume decreases when the unit is
turned on
l The automatic volume adjustment function is activated.
To prevent excessive loudness, the unit automatically controls
its volume within a certain level when the unit is turned on. Turn
up the volume as required. For details, see the following:
– “Basic procedure for playback” (p.27)
No surround effect
l Stereo playback is selected.
Select surround playback or 3D surround playback. For details,
see the following:
– “Playback with 3D surround sound” (p.30)
– “Playback with surround sound” (p.30)
l The volume is too low.
Turn up the volume. For details, see the following:
– “Basic procedure for playback” (p.27)
l The TV or playback device is set to output 2 channel audio
(such as PCM) only.
Change the digital audio output setting on the TV or playback
device to multi-channel linear PCM or bitstream.
l Sound is also heard from the TV built-in speakers.
Set the TV volume to minimum. For details, see the following:
– “Basic procedure for playback” (p.27)
l The listening position is too close to the unit.
The listening position should be at some distance from the unit.
En
61
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha ATS-4080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha ATS-4080 in the language / languages: English as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info