48724
82
Zoom out
Zoom in
Previous page
1/122
Next page
When set to “bar”, the Free EG record and play time is determined by the Tempo
setting in the VOICE COMMON menu. This synchronizes the Free EG movement
with the Arpeggiator or Step Sequencer.
Key Track
The Key Track setting determines the length of the Free
EG in relation to notes played on the keyboard, using
C3 as the basic note length. When set to “0”, the
length will be the same for all notes across the entire
keyboard. Negative values will cause the Free EG
length to decrease when you play in the lower register,
and positive values will cause the Free EG length to
decrease when you play in the higher register.
Settings: -64 ~ +63
Track
Track settings determine the current Free EG track, the
parameter assigned to each track, and which Scene
the Free EG will play. There are three Track
parameters, including Track No (Number), Param
(Parameter) and SceneSw (Switch).
When you start recording the Free EG, the parameter of the first knob you move,
along with the current Scene setting, will be assigned to the track Parameter (i.e.,
that parameter will be recorded in the track). This is convenient for initiating a
Free EG recording immediately, without making all settings beforehand.
Track Confirm and Assignment Procedure
1. Using Track No [UP/DOWN], set the track you
want to record or play.
2. Using Param [UP/DOWN], select the parameter
which you want to record in the track.
3. Using SceneSw [UP/DOWN], set the Scene
(Scene 1, Scene 2, or both Scenes) which you
want the Free EG to affect.
4. If necessary, repeat steps 1 through 3, above,
for selecting other tracks and assigning
parameters to them.
You cannot assign the same parameter to more than one track. If you attempt
to do so, the latest recorded track takes priority, while other tracks will
automatically be turned off for the Scene Switch.
Triggering The Free EG With Patterns
The Free EG can be used in conjunction with the Arpeggiator
or Step Sequencer. When the Trigger is set to “kbd”, the Free
EG will be applied to the pattern.
Each time you press a key the Free EG will be retriggered.
When the Trigger is set to “all”, the Free EG will be
retriggered whenever the Arpeggiator or Step Sequencer is
played.
Loop Type
The Loop Type setting determines the type of loop for
play of the Free EG sequence.
Settings:
off: The Free EG sequence plays once but does not loop. The
parameter settings at the end of the Free EG sequence remain
in effect.
fwd: The Free EG sequence loops from start to end.
half: The Free EG sequence loops from the middle to the
end.
alt (Alternate): The Free EG sequence loops from start to
end, then end to start.
half (Half Alternate): The Free EG sequence loops from
middle to end, then end to middle.
Length
The Length setting determines the time for recording
and play of the Free EG sequence. There are two
Length types, including length determined by number of
measures or by absolute time (seconds).
Settings:
bar (number of measures): 1/2, 1, 3/2, 2, 3, 4, 6, 8
s (seconds): 1.0 ~ 16.0
Motif
Hold = “on”
EG
Key On Key Off Key On
82
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha AN1X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha AN1X in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha AN1X

Yamaha AN1X User Manual - German - 121 pages

Yamaha AN1X User Manual - Dutch - 138 pages

Yamaha AN1X User Manual - French - 120 pages

Yamaha AN1X User Manual - Portuguese - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info