48720

Yamaha A5000 Manual

275
Zoom out
Zoom in
Previous page
1/296
Next page
MIDI Data Format
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● A5000/A4000 • Appendix 275
2. Channel messages
Channel messages are received as follows.
When Program Mode = Single and Omni SW is on, The Note ON/OFF, Control Change, Pitch
Bend, After Touch, and Program Change channels have no meaning.
When Program Change SW is enabled and Program Mode = Single the Basic Receive Channel is
used; when Program Mode = Multi the Part 1 receive channel is used. No program change occurs
when off. However, when a program change is received during internal MIDI sequencer record-
ing, the program change is not recorded even if the Program Change SW is off.
Transmission is performed when the internal MIDI sequencer is playing, and when the KNOB
Control function and FKey Play function are being used.
When the MIDI sequencer is playing, the MIDI events that are played back are transmitted to the
internal tone generator, and also simultaneously transmitted via MIDI OUT.
When Knob control used, a value related to the number of rotations is transmitted for the selected
Ch and Control#.
When the FKey Play function is used, Note On/Off messages will be transmitted on the specified
channel with the specified note number and velocity. The velocity used when transmitting a Note
Off message is fixed. Note Off messages will have a velocity of 0 if the form $8n is used, and if
the form $9n is used the velocity will be determined case by case.
2.1. Reception
2.1.1. Note off
Note range = C-2 — G8
Velocity range = ignored
2.1.2. Note on/off
Note range = C-2 — G8
Velocity range = 0 — 127
2.1.3. Polyphonic aftertouch
Not received.
2.1.4. Control changes
The following parameters can be controlled.
Parameters which function for each program.
Parameters marked by "*" depend on the Program Control settings.
Parameters which function for each MIDI channel of a program
Parameters which function for samples or sample banks
Parameters marked by "*" depend on the Sample Control settings.
2.1.5. Mode messages
Messages which function always
Messages which function for samples or sample banks
2.1.6. Program changes
When a program change message is received, the corresponding program is selected for playback
and editing. Nothing occurs if the Program Change SW is disabled (even when internal sequencer
recording is off). If Program Mode = Single, program change is received via the Basic Receive
Channel (any receive channel when Omni is on). When Program Mode = Multi the Part 1 receive
channel is used.
2.1.7. Pitch bend
The 7 bits of the MSB are used.
For functions marked “* indicates Program (or Sample) control” in “Control Change” of 3.1.4,
pitch bend can be used for ctrl#.
2.1.8. Channel aftertouch
Received.
For functions marked “* indicates Program (or Sample) control” in “Control Change” of 2.1.4,
channel aftertouch can be used for ctrl#.
cntrl# parameter data range
5 Program Portamento Time 0 — 127
0-120 Program Portamento Rate/Time 0 — 127 *
0-120 LFO S/H Speed 0 — 127 *
0-120 AD Input Pan 0 — 127 *
0-120 AD Input Level 0 — 127 *
0-120 AD Input L Pan 0 — 127 *
0-120 AD Input R Pan 0 — 127 *
0-120 AD Input L Level 0 — 127 *
0-120 AD Input R Level 0 — 127 *
0-120 Program Level 0 — 127 *
0-120 EF1 Level 0 — 127 *
0-120 EF1 Pan 0 — 127 *
0-120 EF1 Width 0 — 127 *
0-120 EF1 Parameter 1 — 16 0 — 127 *
0-120 EF2 Level 0 — 127 *
0-120 EF2 Pan 0 — 127 *
0-120 EF2 Width 0 — 127 *
0-120 EF2 Parameter 1 — 16 0 — 127 *
0-120 EF3 Level 0 — 127 *
0-120 EF3 Pan 0 — 127 *
0-120 EF3 Width 0 — 127 *
0-120 EF3 Parameter 1 — 16 0 — 127 *
0-120 EF4 Level 0 — 127 * (A5000 only)
0-120 EF4 Pan 0 — 127 * (A5000 only)
0-120 EF4 Width 0 — 127 * (A5000 only)
0-120 EF4 Parameter 1 — 16 0 — 127 * (A5000 only)
0-120 EF5 Level 0 — 127 * (A5000 only)
0-120 EF5 Pan 0 — 127 * (A5000 only)
0-120 EF5 Width 0 — 127 * (A5000 only)
0-120 EF5 Parameter 1 — 16 0 — 127 * (A5000 only)
0-120 EF6 Level 0 — 127 * (A5000 only)
0-120 EF6 Pan 0 — 127 * (A5000 only)
0-120 EF6 Width 0 — 127 * (A5000 only)
0-120 EF6 Parameter 1 — 16 0 — 127 * (A5000 only)
0-120 Program LFO Depth 0 — 127 *
0-120 Control 1 Range 0 — 127 *
0-120 Control 2 Range 0 — 127 *
0-120 Control 3 Range 0 — 127 *
0-120 Control 4 Range 0 — 127 *
cntrl# parameter data range
7 Volume(Level) 0 — 127
10 Pan 0 — 127
64 Sustain 0 — 127
65 Portament ON/OFF 0 — 127
66 Sostenute 0 — 127
cntrl# parameter data range
0-120 Pitch Mod Depth 0 — 127 *
0-120 Amp Mod Depth 0 — 127 *
0-120 Cutoff Mod Depth 0 — 127 *
0-120 Cutoff Bias 0 — 127 *
0-120 Filter Q/Width 0 — 127 *
0-120 Pan Bias 0 — 127 *
0-120 Pitch Bias 0 — 127 *
0-120 Sample Level 0 — 127 *
0-120 LFO Speed 0 — 127 *
0-120 LFO Delay 0 — 127 *
0-120 AEG Attack 0 — 127 *
0-120 AEG Decay 0 — 127 *
0-120 AEG Sustain Level 0 — 127 *
0-120 AEG Release 0 — 127 *
0-120 PEG Attack 0 — 127 *
0-120 PEG Decay 0 — 127 *
0-120 PEG Release 0 — 127 *
0-120 PEG Init Level 0 — 127 *
0-120 PEG Sustain Level 0 — 127 *
0-120 FEG Attack 0 — 127 *
0-120 FEG Decay 0 — 127 *
0-120 FEG Release 0 — 127 *
0-120 FEG Init Level 0 — 127 *
0-120 FEG Sustain Level 0 — 127 *
0-120 FEG Level 0 — 127 *
0-120 Pitch Bend 0 — 127 *
0-120 Wave Start Address 0 — 127 *
0-120 Cutoff Distance 0 — 127 *
0-120 Filter Gain 0 — 127 *
0-120 Sample Portamento Rate/Time 0 — 127 *
0-120 Sample Control 1 Range 0 — 127 *
0-120 Sample Control 2 Range 0 — 127 *
0-120 Sample Control 3 Range 0 — 127 *
0-120 Sample Control 4 Range 0 — 127 *
0-120 Sample Control 5 Range 0 — 127 *
0-120 Sample Control 6 Range 0 — 127 *
cntrl# parameter data range
120 All sound off 0 — 127
121 Reset all controllers 0 — 127
123 All notes off 0 — 127
cntrl# parameter data range
126 mono mode 0 — 127
127 poly mode 0 — 127
… 275 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha A5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A5000 in the language / languages: English as an attachment in your email.

The manual is 10,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha A5000

Yamaha A5000 User Manual - German - 296 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info