48720
43
Zoom out
Zoom in
Previous page
1/296
Next page
ESSENTIAL PROCEDURES
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● A5000/A4000 • Chapter 2 Sampler Basics & Essential Procedures 43
2. Select a Sample To Edit
If the sample you want to edit isn’t already selected (the sample name appears at the bottom of the
window in the upper left corner of the display), press Knob 1 (TREE) to see a list of the available sam-
ples, use Knob 2 to select the desired sample, then press Knob 1 (PARAM) again to return to the
“EDIT-Waveform” display.
You can play the selected sample by pressing the [AUDITION] button.
3. Specify the Wave Start & End Addresses
With the topmost function line on the display highlighted (“Wave”: use Knob 1 to select it if it isn’t
already selected), use Knob 2 and Knob 3 to specify the start and end addresses at which the sample is
to be trimmed, respectively. Solid vertical lines in the waveform display show the currently selected
Start and End points.
If you need coarser or finer adjustment, use Knob 4 to select the digit in the Start and End values
which will be directly adjusted by Knobs 2 and 3. Your options are x1, x10, x100, x1000, and x10000.
The position of the inverse block cursor in the address values shows the digit currently being adjusted.
You can hear how the edited sample sounds at any point during this process by pressing the [AUDI-
TION] button.
Be sure to check out the “Handy Auto-addressing Functions” described in the next section (“Step-
by-Step LOOPING”). They can make locating optimum Start and End points a lot easier.
You can change the units used for trim and loop point specification by scrolling down to the “End-
Type” parameter and using Knob 2 to select the desired unit: “Address”, “Length”, “Time”, or
“Beat”. See page 124 for details on this feature.
The specified Wave Start and End points are saved with the sample data.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha A5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A5000 in the language / languages: English as an attachment in your email.

The manual is 10,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha A5000

Yamaha A5000 User Manual - German - 296 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info