48720
37
Zoom out
Zoom in
Previous page
1/296
Next page
ESSENTIAL PROCEDURES
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● A5000/A4000 • Chapter 2 Sampler Basics & Essential Procedures 37
ESSENTIAL PROCEDURES
This section provides step-by-step procedures for some of the most important A5000/A4000 sampling,
editing, and playback operations. Although complete coverage of all possible procedures and variations is
not possible within the scope of this manual, the procedures provided will help you to become familiar with
the A5000/A4000 interface to the point that you should be able to achieve the desired results by referring to
the detailed “Reference” section of the manual (beginning on page 87).
Make sure that you have properly connected and set up your A5000/A4000 as described in the
Setting Up section (page 17) before attempting the procedures in this section.
Step-by-Step
MICROPHONE/LINE RECORDING
This section describes recording from a microphone or line source. For details on loading sample data from
a floppy disk or other storage device, refer to page 165 in the reference section of this manual.
1. Connect a Source
If you will be recording via microphone, connect a microphone with a 1/4” phone plug connector (or
use an appropriate adaptor) to the sampler’s “L” INPUT.
Just about any high-quality dynamic or condenser microphone can be used, but the A5000/A4000
does not provide phantom power for studio-type phantom-powered condenser microphones.
Two microphones connected to the “L” and “R” inputs, or a stereo microphone with independent 1/
4” phone plugs for the left and right channels, can be used with the A5000/A4000 to record stereo
samples.
If you will be recording from a line source, connect it to the “L,” or “L” and “R” INPUT jacks.
If your source has either coaxial or optical digital output and you have installed the optional AIEB1
I/O Expansion Board in your sampler (page 13, 14), you can connect the digital output from your
source directly to either the coaxial SPDIF or optical input on the expansion board.
2. Go To the Record Setup Display
Press the [REC] mode button, and then the [SETUP] function key to go to the “REC-RecSetup” dis-
play.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha A5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A5000 in the language / languages: English as an attachment in your email.

The manual is 10,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha A5000

Yamaha A5000 User Manual - German - 296 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info