48722
282
Zoom out
Zoom in
Previous page
1/296
Next page
282
Anhang
• A5000/A4000
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
MIDI-Datenformat
(*1) In Bezug auf den analogen Eingang 44.1 kHz, für den digitalen Eingang sind die Raten 0:x1, 1:x1/2, 2:x1/
4, 3:x1/8.
(*2) -1:aus
(*3) -1:ABHÖREN
(*4) 128:“=Orig“
(*5) -1:“=Orig“
(*6) -2: aus, -1: ABHÖREN, 0-15: A01-16, 16: Grundempfangskanal, 17-32:B01-16(nur A5000)
(* 7) -1:alle
Table 2 Parameteränderung
2.1 Objektbearbeitung
Jedes Datenbyte wird in höhere und niedrigere vier Bits eingeteilt und empfangen/übertragen als zwei Bytes
der MIDI-Daten.
2.1.1 Program Parameter
0925 UC 0-1 start trigger type
0926 UC 0-1 stop trigger type
0927 UC 0-63 start edge level
0928 UC 0-63 stop trigger type
0929 SC 0-2 record map to
0930 UC -1,0-127 record key range low (*4)
0931 UC 0-127,128 record key range high (*5)
0932 SC 0-127 record original key
0933 UC 0-1 auto normalize on
0934 SC -1,0-7 external control SCSI ID (*2)
0935 UC 1-99 external control start track
0936 UC 1-99 external control start index
0937 UC 0-5 monitor outpu
0938 UC 0-127 monitor level
0939 UC 0-127 click level
0940 US 8000-15999 click tempo 80.00-159.99
0942 UC 1-15 click beat
0943 UC 0-1 monitor on
0944 UC 0-1 record map manual/auto
0945 UC 0-127 record map auto original key
0946 UC 0-1 record map key white/all
0947 UC*8 reserved
0955 UC*16 reserved
0971 UC 0-1 AD input gain line/mic
0972 UC*3 reserved
0975 UC*5 reserved
-----------------------------------------------------------------
0980 UC*8 reserved
-----------------------------------------------------------------
0988 UC*2 reserved
0990 UC 0-1 bulk protect
0991 UC 0-1 after touch disable
0992 UC 0-1 control change disable
0993 UC 0-1 pitch bend disable
0994 UC reserved
0995 ^ 0-17 MIDI device number
0996 UC 0-1 SysEx receive port (reserved in A4000 )
0997 UC*7 reserved
-----Register der Parameter--------------------
1004 224 byte [Sample Parameter]
1228 120 byte [Effect Parameter]*3 (effect1-3)
1348 16 byte reserved
1364 120 byte [effect parameter]*3 (effect4-6) (A5000 only)
1484 16 byte [control]*4 (program control 1-4)
1500 US b b0:MIDI channel B01 control reset...
b15:MIDI channel B16 controller reset (A5000 only)
1502 US b b0:MIDI channel B01 note on normal/toggle...
b15:MIDI channel B16 note on normal/toggle (A5000
only)
1504 UC b b2-0:effect connect (effect4-6)
1505 UC 0-12 AD in (L) output1
1506 UC 0-127 AD in (L) level1
1507 UC 0-12 AD in (L) output2
1508 UC 0-127 AD in (L) level2
1509 SC +/ - 63 AD in R pan
1510 UC 0-12 AD in R output1
1511 UC 0-127 AD in R level1
1512 UC 0-12 AD in R output2
1513 UC 0-127 AD in R level2
1514 UC*16 0-127 program LFO step wave value 1-16
1530 UC b b2-0:step wave total steps, b4-3:step wave slope
1531 UC*9 reserved
1540 UC*8 reserved
1548 UC b b0:AD in on, b2-1:AD in source,
b5-3:effect connect (effect 1-3), b7-6:program LFO
sync
1549 UC b b2-0:program LFO cycle, b5-3:program LFO wave,
b7-6:program LFO initial phase
1550 US b b0:MIDI channel A01 controller reset...
b15:MIDI channel A16 controller reset...
1552 US b b0:MIDI channel A01 note on normal/toggle...
b15:MIDI channel A16 note on normal/toggle
1554 SC ±63 AD in (L) pan
1555 UC reserved
1556 UC reserved
1557 UC reserved
1558 UC reserved
1559 UC 0-127 programlevel
1560 SC reserved
1561 SC reserved
1562 SC ±127 program transpose
1563 SC -2,-1,0-32 program LFO reset MIDI channel (*6)
1564 UC 0-3 program portamento type
1565 UC 0-127 program portamento rate
1566 UC 0-127 program portamento time
1567 UC 0-127 S/H speed
1568 UC 25-250 program LFO tempo
1569 SC -1,0-127 program LFO reset note (*7)
1570 UC*10 reserved
-----------------------------------------------------------------
1580 UC 0-1 sequence MIDI port B/A
1581 UC*15 reserved
1596 UC 0-1 DIG&OPT output 20bit/24bit
1597
UC*2467
reserved
Datenbyte
Punkt Typ Beschreibung 1. 2. 3. 4.
P1 — P6
decimal Parameter Number
don‘t care
Daten-
größe
UC 1 byte (unsigned 8 bit) b7-b0
——
SC
1 byte (signed 8 bit, 2‘s
complement)
sign, b6-b0
——
US 2 byte (unsigned 16 bit) b15-b8 b7-b0
——
SS
2 byte (signed16 bit, 2‘s
complement)
sign, b14-b8 b7-b0
——
UL 4 byte (unsigned 32 bit) b31-b24 b23-16 b15-b8 b7-b0
SL
4 byte (signed 32 bit, 2‘s
complement)
sign, b30-
b24
b23-16 b15-b8 b7-b0
*n n bytes of each data type
Wert
c
All displayable ASCII-Codes
except ¥
b
bitmap type
refer to name column for bit
position
unused or internal use only (0
not appropriate)
Name [ ]
Parameter block
Refer to each parameter block
for details
original Datenbyte b7,b6,b5,b4,b3,b2,b1,b0
MIDI-
Daten
1. byte 0,0,0,0,b7,b6,b5,b4
2. byte 0,0,0,0,b3,b2,b1,b0
P1 P2 P3 P4 P5 P6 Datengröße Datenwert Name
0 [Common]
1 0 UC*8 c program name (read only)
1 1 0-31 UC 0,1
control reset für MIDI channel
A01-B16 (*5)
1 2 0-31 UC 0,1
Note on normal/toggle for
MIDI ch A01-B16 (*5)
1 3 UC 0,1 AD in on
1 4 UC 0-2 AD in source
1 5 SC ±63 AD in (L) pan
1 6 UC 0-12 AD in (L) output1 (*8)
1 7 UC 0-127 AD in (L) output level 1
1 8 UC 0-12 AD in (L) output2 (*8)
1 9 UC 0-127 AD in (L) output level 2
1 10 UC 0-127 programlevel
1 11 UC 0-6 program LFO cycle
1 12 UC 0,1 program LFO sync
1 13 SC ±127 program transpose
1 14 UC 25-250 program LFO tempo
1 15 UC 0-6 program LFO wave
1 16 UC 0-3 program portamento type
1 17 UC 1-127 program portamento rate
1 18 UC 1-127 program portamento time
1 19 UC 0-127 S/H speed
1 20 US 0-999 number of assigned Samples
1 21 0-5 0 UC 0,1 effect1-6 bypass (*6)
1 21 0-5 1 UC 0-127 effect1-6 input level (*6)
App_p274-286-GER Page 282 Tuesday, August 22, 2000 6:56 PM
282


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha A4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A4000 in the language / languages: German as an attachment in your email.

The manual is 5,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha A4000

Yamaha A4000 User Manual - English - 296 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info