48722
273
Zoom out
Zoom in
Previous page
1/296
Next page
Error Messages
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● A5000/A4000 • Appendix 273
Error Messages
Here is a list of the error messages that will appear when an incorrect operation is performed or when a setting is incorrect.
Audio CD is required. An audio CD is not loaded into the external CD-ROM drive.
Audition requires more memory. There is not enough wave memory available to use the AUDITION function. Direct playback from the disk is
not possible.
Bulk data error. Processing of a bulk dump failed.
Bulk protect switch is ON. Bulk data or a SCSI message was received when the bulk protect switch was “on.
Cannot copy Volume to FD. Cannot copy a volume unit to a floppy disk.
Cannot create sample (>16MW). An attempt was made to create a sample larger than 16 Mwords (32 megabytes).
Cannot find associated file. The voice file associated with the voice data could not be located.
Cannot find disk. Not ready for disk operation.
Cannot find CD-R. Cannot prepare the CD-ROM drive for operation.
Cannot find file. The specified file does not exist.
Cannot find SCSI or IDE disk. SCSI or IDE disk could not be found.
Cannot revert this sample. The revert function cannot be used with newly created samples which have not been saved or imported
samples.
Cannot write to this disk. An attempt has been made to write to an unwriteable CD-ROM or other disk.
CD-R size overflow. The data to be written exceeds the capacity of the CD-R disk.
DIG or OPT signal input is required. No digital signal is present at the DIGITAL IN or OPTICAL IN terminal.
Disk drive is not ready. The disk is not ready for saving or loading.
Disk is duplicated in list. Duplicate backup source disks have been specified.
Disk is not formatted. The disk is not formatted for the A5000/A4000.
Disk is write protected. The disk is write protected, and writing could not be performed.
Disk read/write error. An error occurred while reading or writing to/from disk.
File is being accessed. You attempted to access a file which was undergoing some type of processing.
MIDI buffer is full. The A5000/A4000’s processing was not able to keep up with MIDI input.
MIDI is busy. You attempted to execute a bulk dump from the front panel while a bulk dump or parameter change etc.
was being processed.
MIDI receive error. A MIDI receive error occurred.
Name already exists. A file on disk or in memory with the specified name already exists.
Non-existent track or index. The audio CD loaded into the external CD-ROM drive does not have the specified track number or index
number.
Not enough disk area or
too many items.
There is not enough disk space to complete the operation, or the total number of samples/sample banks
which can be saved to disk has been exceeded.
Param memory full or
too many samples.
The operation cannot be completed because not enough parameter memory is available, or the number of
samples, sample banks, etc., which can be retained in memory has been exceeded.
Please set device number. Transmission or reception of bulk data was attempted with the device number turned off.
Sample Bank is selected in list. Sample banks cannot be written to an audio CD.
Sample processing failed. When executing a waveform processing command, the specified command could not be executed due to
insufficient free space in the work area of wave memory, or for some other reason.
SIMM configuration error. The A5000/A4000 was not able to start up, due to the fact that expansion SIMM’s are not installed in pairs,
or because the usage order of the expansion slots is incorrect etc.
SCSI terminator or device error. A SCSI error has occurred. Check terminators and connections and try again.
Some samples are copy protected. You have attempted to export or write copy-protected samples to an audio CD.
Too many samples. The operation cannot be completed because the number of target samples is too great. Up to 128 samples
can be arranged at one time, and the maximum number of samples that can be contained in a sample
bank is 127.
Too many takes. The sample could not be created, either because the maximum number of 64 was exceeded when consec-
utively recording with New+, or because an identically-named sample already exists.
Try physical format. Logical formatting failed. Try physical formatting.
Unknown disk or file format. Either the contents of the file have been damaged, or it is the wrong format.
Unsupported file format. The file is corrupted, or has an unsupported format.
Unsupported file name. The file name could not be detected by the A5000/A4000.
Unsupported sampling frequency. Samples that do not have a 44.1 kHz sampling rate cannot be written to an audio CD.
Verification error. A verification error occurred while writing to disk.
Wave memory error. An error occurred in wave memory.
Wave memory full. The specified command could not be executed due to insufficient free space in wave memory.
273


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha A4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A4000 in the language / languages: English as an attachment in your email.

The manual is 10,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha A4000

Yamaha A4000 User Manual - German - 296 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info