48718
343
Zoom out
Zoom in
Previous page
1/376
Next page
Effect parameter list
341
Appendix
Appendix
20: TWah+Drum Set (TOUCH WAH+DIST), 21: TWah+OD (TOUCH WAH+ODRV)
1 Sensitive 0~127 Sensitivity at which the wah filter will change in response to the input level
2 Cutoff Freq Offset 0~127 Offset value for the wah filter control frequency
3 Resonance 1.0~12.0 Bandwidth of the wah filter
4 Drive 0~127 (Distortion) Degree of distortion
5 PostDrive EQ Low -12~+12dB (Distortion) Gain by which the EQ will boost/cut the low range
6 PostDrive EQ Mid -12~+12dB (Distortion) Frequency at which the filter will cut the high range
7 PostDrive LPF Freq 1.0kHz~thru (Distortion) Frequency at which the filter will cut the high range
8 Drive Output Level 0~127 (Distortion) Output leve
9 EQ Low Frequency 32Hz~2.0kHz Frequency at which the EQ will boost/cut the low range
10 EQ Low Gain -12~+12dB Amount of gain by which the EQ will boost/cut the low range
11 EQ High Frequency 500Hz~16.0kHz Frequency at which the EQ will boost/cut the high range
12 EQ High Gain -12~+12dB Amount of gain by which the EQ will boost/cut the high range
13 Dry/Wet Balance D63>W ~ D=W ~ D<W63 Balance between the dry sound and effect sound
22: Dist (DISTORTION), 23: OverDrv (OVERDRIVE)
1 Drive 0~127 Degree of distortion
2 EQ Low Frequency 32Hz~2.0kHz Frequency at which the EQ will boost/cut the low range
3 EQ Low Gain -12~+12dB Gain with which the EQ will boost/cut the low range
4 LPF Cutoff 1.0kHz~Thru Frequency at which the filter will cut the high range
5 Output Level 0~127 Output level
6 Edge 0~127 Curve of distortion characteristics (sharp (127): distortion begins suddenly;
mild (0): distortion begins gradually)
7 EQ Mid Frequency 100Hz~10.0kHz Frequency at which the EQ will boost/cut the mid range
8 EQ Mid Gain -12~+12dB Gain with which the EQ will boost/cut the mid range
9 EQ Mid Width 1.0~12.0 Width of the area in which the EQ will boost/cut the mid range
10 Dry/Wet Balance D63>W ~ D=W ~ D<W63 Balance between the dry sound and the effect sound
24: AmpSim (AMP SIMULATOR)
1 Dry/Wet Balance D63>W ~ D=W ~ D<W63 Balance between dry sound and effect sound
2 Drive 0~127 Degree of distortion
3 AMP Type Off, Stack, Combo, Tube Select the type of amp to be simulated
4 LPF Cutoff 315Hz~Thru Frequency at which the low pass filter will cut the high range
5 Edge 0~127 Curve of distortion characteristics (sharp (127): distortion begins suddenly;
mild (0): distortion begins gradually)
6 Output Level 0~127 Output level
25: Comp (COMPRESSOR)
1 Threshold -48~-6dB Input level at which compression begins to be applied
2 Attack 1~40ms Time until when the compressor begins to take effect
3 Release 10~680ms Time until the compressor effect disappears
4 Ratio 1.0~20.0 Compression ratio of the compressor
5 Output Level 0~127 Output level
26: Comp+Drum Set (COMP+DIST)
1 Drive 0~127 Degree of distortion
2 LPF Cutoff Freq 1.0k~Thru Frequency at which the filter will cut the high range
3 Output Level 0~127 Output level
4 Edge 0~127 Curve of distortion characteristics (sharp (127): distortion begins suddenly;
mild (0): distortion begins gradually)
5 Attack 1ms~40ms (Compressor) Time until when the compressor begins to take effect
6 Release 10ms~680ms (Compressor) Time until the compressor effect disappears
7 Threshold -48dB~-6dB (Compressor) Input level at which compression begins to be applied
8 Ratio 1.0~20.0 (Compression) Compression ratio of the compressor
9 EQ Low Frequency 32Hz~2.0kHz Frequency at which the EQ will boost/cut the low range
10 EQ Low Gain -12~+12dB Gain with which the EQ will boost/cut the low range
11 EQ Mid Frequency 100Hz~10.0kHz Frequency at which the EQ will boost/cut the mid range
12 EQ Mid Gain -12~+12dB Gain with which the EQ will boost/cut the mid range
13 EQ Mid Width 1.0~12.0 Width of the mid range area which the EQ will boost/cut
14 Dry/Wet Balance D63>W ~ D=W ~ D<W63 Balance of the dry sound and effect sound
343


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha A3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A3000 in the language / languages: English as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha A3000

Yamaha A3000 User Manual - German - 375 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info