48718
331
Zoom out
Zoom in
Previous page
1/376
Next page
Connecting external SCSI devices
329
Appendix
Appendix
3.
Set the SCSI ID (0—7) of the external SCSI device.
Select a SCSI ID that will not conflict with the other SCSI devices (including the A3000).
When the A3000 is shipped from the factory, the SCSI ID is set to 6. When installing the
internal hard disk, we suggest that you set the internal hard disk to a SCSI ID of 4.
4.
Attach the terminator to the SCSI connector (the vacant one of the two SCSI
connectors) of the last device in the daisy-chain.
Alternatively, turn on the terminator switch of that device.
5.
Make sure that the terminator switch is turned OFF for all other devices in the
daisy-chain (i.e., all devices other than the last device).
Important
After installing a new hard disk or MO drive (or one which has been used by another
computer device), connect your audio and MIDI devices, and turn on the external SCSI
devices and the A3000. (If using an MO drive, insert the MO disk.) Then mount the disk
(270), format it (254), and partition it into volumes (266).
FYI
Many articles and books concerning SCSI are available. However most of them discuss
only the concepts or the specification, and do not tell you what to do if the system does
not work when connected as described. The following paragraphs will provide more
information about SCSI that will help you correct problems which may occur when
SCSI devices are connected. Please read this material if you experience problems. Please
be aware that when connecting SCSI devices, problems with termination and cabling
can cause valuable data to be damaged. We regret that Yamaha can take no responsibil-
ity regarding any data which is lost.
Principles of termination
Termination is the greatest source of potential problems in a SCSI system. Termination
refers to an impedance-matched resistance which is connected to the bus to terminate
the end of the data path. The “terminator” is the resistance required to provide termina-
tion.
331


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha A3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A3000 in the language / languages: English as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha A3000

Yamaha A3000 User Manual - German - 375 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info