48718
324
Zoom out
Zoom in
Previous page
1/376
Next page
Setting the SCSI Board Terminator Switch
322
Appendix
5.
Set the SCSI terminator switch.
Set the TERM switch on the SCSI board to match your configuration, as follows.
If you are connecting an internal hard disk
Set the SCSI terminator switch of the SCSI interface board to OFF. (When shipped from
the factory this is ON.)
* In this case you must also set the SCSI terminator of the internal disk itself to ON.
(324) And if you are connecting one or more external SCSI devices, you must also
be sure to switch ON the terminator of the final device in the chain. (Alternatively,
turn its terminator switch ON.) (328)
If you are not connecting an internal hard disk
Set the SCSI terminator switch of the SCSI interface board to ON. (When shipped from
the factory this is ON.)
* If you are connecting one or more external SCSI devices, you must also be sure to
switch ON the terminator of the final device in the chain. (Alternatively, turn its
terminator switch ON.) (328)
6.
Return the top cover to its original position, and fasten into place with the
screws removed at Step 3 above.
Be careful to keep clear of internal cabling when remounting the cover.
When refastening the three screws on the top, press inward on the top center part of
the front panel.
7.
Plug in the power cord.
324


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha A3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A3000 in the language / languages: English as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha A3000

Yamaha A3000 User Manual - German - 375 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info