652728
11
Zoom out
Zoom in
Previous page
1/114
Next page
PLAYING BACK MUSIC STORED ON A PC (USB DAC FUNCTION) (A-U670 ONLY)
9 En
English
n Playing back music stored on a PC
Check if the SYSTEM jacks of the network CD player and of the unit are connected to
each other. If not connected, operation is unavailable with the network CD player and its
remote control.
1 Connect the PC to the unit with a USB cable.
2 Turn on the PC.
3 Press the A (power) button on the front panel to turn on the unit.
You can also turn on the unit by pressing the
A (power) button on the remote control
of the connected network CD player.
The unit is turned on by interlocking with the network CD player (+page 10).
4 Press the USB button on the remote control of the connected network
CD player (or rotate the INPUT knob of the connected network CD
player) to select [USB DAC].
5 Set the audio output destination of the PC to “Yamaha A-U670/A-U671.
With Windows OS:
Control Panel -> Hardware and Sound -> Sound -> [Playback] tab
With Mac OS:
System Preferences -> Sound -> [Output] tab
The setting may vary, depending on the operating systems. For details, consult the
manufacturer of your PC.
6 Operate the PC to start playback of music files.
When the music signal is input from the PC to the unit, the USB DAC indicator on
the front panel lights up in accordance with the sampling frequency of the music
being played. Sampling frequencies available for the unit are as follows:
n Adjusting the sound volume
To obtain higher sound quality, set the sound volume at the PC to the maximum, and
gradually increase the volume at this unit from the minimum to your desired level.
Do not disconnect the USB cable, turn off the unit, or change the input while playback on a PC
connected via the USB cable is in progress. Doing so may cause a malfunction.
To mute operation sounds of the PC during music playback, change the setting on the PC.
If music files cannot be played correctly, restart the computer and perform the mentioned procedure again.
The music files stored on a PC cannot be controlled from this unit. Operate them on the PC.
When the unit is not connected with a network CD player, or when a network CD player is turned
off even if the SYSTEM jacks of the unit and of the network CD player are connected, the input
source automatically switches to USB when the unit detects the PC connected to it. When the unit
cannot recognize the connection, the input source automatically switches to ANALOG IN.
USB DAC
indicator
A
Indicator Frequency
PCM
×1 44.1/48 kHz
×2 88.2/96 kHz
×4 176.4/192 kHz
×8 352.8/384 kHz
DSD
×1 2.8224 MHz
×2 5.6448 MHz
Notes
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha A-U670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A-U670 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 11,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info