Manual Yamaha A-S3000 (page 20 of 226) (English, German, Dutch, French, Italian, Swedish, Spanish)

516982

Zoom out

Zoom in

1/226

20 En

Connections

■ Connecting to the BAL 1/BAL 2 jacks

Connect your CD player or network player with the XLR

balanced output jacks.

Set the ATTENUATOR selector and PHASE selector

located below the BAL 1 or BAL 2 jacks according to the

component to be connected.

ATTENUATOR selector:

Select the allowable input level for the XLR balanced

input jacks. If sound from the connected component is

distorted, set the ATTENUATOR selector to ATT. (-6 dB).

PHASE selector:

Select the assignment of the HOT pin of the XLR

balanced input jacks (pin 2 HOT or pin 3 HOT).

NORMAL (pin 2 HOT)

INV. (pin 3 HOT)

Refer to the owner’s manual supplied with the connected

component and verify the assignment of the HOT pin of

its XLR balanced output jacks.

Yamaha CD players are set to NORMAL (pin 2 HOT).

XLR connectors:

When connecting, be sure to match the pins and insert the

connector of the “male” XLR balanced cable until you

hear a “click”. When disconnecting, pull out the “male”

XLR balanced cable while holding down the lever of the

BAL 1 or BAL 2 jack.

To use the XLR balanced connection, you must select BAL 1 or

BAL 2 as the input source.

1: ground2: hot

3: cold

1: ground2: cold

3: hot

Note

“Female” XLR connector

“Male” XLR connector

Lever

BAL 1/BAL 2 jack

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A-S3000 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 5,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha A-S3000 Manual

Product: