517061
19
Zoom out
Zoom in
Previous page
1/89
Next page
14 02R Applications
Yamaha 02R & 03D Applications Guide
2
02R with ADAT & JL Cooper Datasync-2
This application shows how the 02R can be used with a JL Cooper Datasync-2 Synchronizer
to create a 24-input, 8-track digital recording system. The JL Cooper Datasync-2
Synchronizer is a cost-effective device for setting up a synchronized 02R and ADAT system.
The eight digital tape returns and 24 Mic/Line inputs provide up to 32 inputs at mixdown.
In addition, the 02Rs built-in automation and scene memory systems provide both
dynamic and static mix automation referenced to MIDI timecode.
Connections
The ADAT (CD8-AT) card must be screwed securely in place. Do not leave the screws out
after installation as the card will not be grounded correctly.
The Digital In/Out connectors on the 02R and ADAT are connected together using
Optical Cables. Press the DIGITAL IN button on the ADAT to use the DIGITAL IN.
The ADAT’s eight tracks connect to 02R slot [1], tape inputs one through eight.
The JL Cooper Datasync-2 Synchronizer converts the ADAT’s internal timecode to MIDI
timecode or SMPTE timecode.
A 9-pin Sync cable for connecting the ADAT and Datasync-2 is available from Alesis.
02R Wordclock Setup
The ADAT (CD8-AT) card is installed in Slot [1], so any pair of the first eight tape inputs
can be selected as the wordclock source on the DIGITAL I/O menu.
ADAT Wordclock Setup
The ADAT should be set as wordclock master. To confirm this, press the SET LOCATE and
DIGITAL IN buttons together. The display should show “int”, meaning internal wordclock.
The ADAT sampling rate can be set to either 48 kHz or 44.1 kHz. Use Fixed mode for
48 kHz and Variable mode for 44.1 kHz (using the PITCH DOWN button, set to –147 cents.
At which point “–146, 44.1, –148” appears on the display). The newer ADAT-XT has
dedicated switches for selecting these two sampling rates.
In Figure 2 the ADAT is shown as wordclock master. However, it could alternatively be used
as wordclock slave with the 02R as master. In this case, the ADAT would be set to digi”. This
can be confirmed by pressing the DIGITAL IN and SET LOCATE buttons together. The
internal clock can then be set on the 02R.
Notes
Press the DIGITAL IN button on the ADAT to use the DIGITAL INPUT.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha 03D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha 03D in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha 03D

Yamaha 03D User Manual - German - 307 pages

Yamaha 03D User Manual - Dutch - 302 pages

Yamaha 03D User Manual - French - 300 pages

Yamaha 03D User Manual - Italian - 301 pages

Yamaha 03D User Manual - Portuguese - 141 pages

Yamaha 03D User Manual - Spanish - 315 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info