559199
39
Zoom out
Zoom in
Previous page
1/350
Next page
Rear Panel 39
02R96 Version 2—Owner’s Manual
Analog Master I/O Section
A
STUDIO MONITOR OUT +4 dB (BAL)
These balanced 1/4-inch TRS phone jacks, nominal output
level +4 dB, output the analog Studio Monitor signal for
monitoring in the actual studio. The source, which is
selected by using the STUDIO buttons in the MONITOR
section, can be Aux Send #7, Aux Send #8, the Stereo Out, or Control Room. The output
level is controlled by the STUDIO LEVEL control. See “Studio Monitoring” on page 137 for
more information.
B STEREO OUT +4 dB (BAL)
These balanced XLR-3-32-type connectors, nomi-
nal output level +4 dB, output the analog Stereo
Out signal and are typically connected the stereo
inputs of a 2-track recorder. They are wired pin
1–ground, pin 2–hot (+), and pin 3–cold (–). See “Stereo Out Connectors” on page 92.
C 2TR IN ANALOG 1 +4 dB (BAL)
These balanced 1/4-inch TRS phone jacks, nominal input
level +4 dB, are typically used to connect the analog stereo
outputs of a 2-track recorder. Signals connected here can
be monitored via the CONTROL ROOM MONITOR
OUT by pressing the CONTROL ROOM [2TR A1] button. In addition, these inputs can be
patched to Input Channels or Insert Ins. See “2TR Analog INs” on page 54.
D CONTROL ROOM MONITOR OUT +4 dB (BAL)
These balanced 1/4-inch TRS phone jacks, nominal output
level +4 dB, output the analog Control Room Monitor sig-
nal and are typically used to feed the control rooms main
monitors. See “Control Room Monitoring” on page 136
for more information.
E STEREO OUT –10 dBV (UNBAL)
These unbalanced phono connectors, nominal output level
–10 dBV, output the analog Stereo Out signal and are typically
connected to the stereo inputs of a 2-track recorder. See “Stereo
Out Connectors on page 92.
F 2TR IN ANALOG 2 –10 dBV (UNBAL)
These unbalanced phono connectors, nominal input level
–10 dBV, are typically used to connect the analog stereo outputs
of a 2-track recorder. Signals connected here can be monitored
via the CONTROL ROOM MONITOR OUTs by pressing the
CONTROL ROOM [2TR A2] button. In addition, these inputs can be patched to Input
Channels or Insert Ins. See “2TR Analog INs on page 54.
21 3
4 5 6
1/4" TRS phone plug
Tip (hot)
Ring (cold)
Sleeve (ground)
Female XLR plug
2 (hot)
1 (ground)
3 (cold)
1/4" TRS phone plug
Tip (hot)
Ring (cold)
Sleeve (ground)
1/4" TRS phone plug
Tip (hot)
Ring (cold)
Sleeve (ground)
Phono plug
Tip (hot)
Sleeve (ground)
Phono plug
Tip (hot)
Sleeve (ground)
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha 02R96VCM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha 02R96VCM in the language / languages: English as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha 02R96VCM

Yamaha 02R96VCM User Manual - German - 357 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info