559199
7
Zoom out
Zoom in
Previous page
1/350
Next page
New Functions in 02R96 Version 2
7
02R96 Version 2—Owner’s Manual
Aux Sends
•You can exclude channels from Aux Sends (Mix Minus).
page 104
•You can copy the channel fader positions to Aux Sends.
page 104
•You can set all Send levels to nominal simultaneously.
page 99
•If an Aux Send is set to pre-fader, you can set the Pre point before or after the [ON] button.
page 99
Common Channel Functions
•Input and Output Channel Meter pages indicate the gain reduction being applied by the
Gate and Compressor.
page 108
•You can select whether the Input Channel’s Pan setting is used when the Input Channel Solo
signal is set to Pre Fader.
page 121
•Raising the channel faders for soloed Channels from –
can unsolo the Channels.
page 121
•The AUX SELECT [AUX 1]–[AUX 8] buttons enable you to solo or unsolo Aux Sends.
page 121
•The Fader Group Master function enables you to control the overall level of the Fader group
channels simultaneously while maintaining the relative level balance of each channel.
page 127
•The Mute Group Master function enables you to mute all channels in a Mute group simul-
taneously.
page 129
Monitor
•The level of the Surround Monitor can be reset to 85dB SPL.
page 138
•A new parameter has been added to Base Management on the Surround Monitor Setup
page.
page 140
•Surround Monitor is also available when Surround mode is set to Stereo.
•You can simultaneously select BUS and SLOT on the Surround Monitor page.
•You can select from Slot Channel 9 through Channel 16 as Surround Monitor signal sources.
•You can simultaneously select 2TRD, D2, D3, A1, or A2, and STEREO, ASSIGN1, or
ASSIGN2 as Control Monitor signal sources.
•You can select the Talkback mic signal as the Studio Monitor source.
page 142
Internal Effects and Plug-ins
•You can add optional Add-On Effects to the preset effects.
page 157
Scene Memory
•You can globally apply the Fade Time setting to all scenes.
page 166
•You can globally apply the Recall Safe setting to all scenes.
page 167
•Any channel or parameter settings in the current scene can be copied and pasted into other
scenes.
page 168
•You can select more parameters for the Recall Safe function.
page 167
Automix
•You can insert the current mix parameters in a region specified in the Automix data.
page 180
•Touching the faders can punch parameter values in and out if the corresponding OVER-
WRITE button is set to on.
page 171
•A parameter related to timecode synchronization has been added.
page 234
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha 02R96VCM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha 02R96VCM in the language / languages: English as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha 02R96VCM

Yamaha 02R96VCM User Manual - German - 357 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info